Operation Manual

84
Connecting/using other devices
Gigaset DL500A analog / IM-NORD EN / A31008-N3103-R201-2-7619 / HS_and_other_Devices.fm / 20.01.11
Version 4, 16.09.2005
u The Bluetooth menu cannot be opened
on the base.
u You can use the headset and at the same
time use a mobile/data device to initiate,
accept or manage a call.
u You cannot use the headset while trans-
ferring data via Bluetooth.
Connecting and using a
wire-bound headset
You can connect a headset to the base using
a 2.5 mm jack connector.
For details about your headset, see the
accompanying user guide.
Connecting the headset
¤ Before you connect the headset, assign
the Headset function to a function key on
the base (
¢ page 85).
¤ Next, plug the jack connector on your
headset into the connection socket on
your base (
¢ page 11).
Accepting/transferring calls on the
headset
Prerequisite:
u You are talking on the base or
u You are trying to connect to another
party or
u A call is being signalled on the base
¤ Press the function key Headset on the
base to accept the call on the headset.
Calling
¤ Enter the phone number on the base and
press the Headset function key.
Please note
u You should still use the Headset func-
tion key if your headset has a P2T key.
u For instructions on adjusting the
speaking volume on your headset,
¢ page 88.
u If a Bluetooth headset is also regis-
tered with the base and it is in range,
the call/connection is transferred to
the Bluetooth headset. The Bluetooth
headset takes priority.