Operation Manual

89
Setting up the base
Gigaset DL500A analog / IM-NORD EN / A31008-N3103-R201-2-7619 / settings.fm / 20.01.11
Version 4, 16.09.2005
u For external calls to the GSM connection
of a mobile registered via Bluetooth
(
¢ page 78); the Bluetooth name of the
mobile is shown subsequently for the
GSM connection
In idle status:
v
¢
Ï
Settings
¢ Audio Settings
¢ Ringer Settings ¢ Melodies
q Select Internal calls or For
external calls.
r Select the melody for this con-
nection.
sr Where necessary, select the
next connection and set a mel-
ody etc.
§Save§ Press the display key to save the
settings.
Or:
You can set the ringer melody so it is used for
both internal and external calls.
q Select All calls.
r Select melody.
§Save§ Press the display key.
§Yes§ Press the display key to confirm
the settings.
The setting for all calls will not work as soon
as you change the setting for an individual
connection.
Setting time control for external
calls
You can specify a time period when you do
not want the base to signal external calls
e.g., during the night.
Prerequisite: The date and time have
already been set.
v
¢
Ï
¢ Audio Settings
¢ Ringer Settings ¢ Time Control
¤ You can enter data in the following fields:
For external calls:
Select On or Off.
The following fields only appear when For
external calls = On.
Suspend ring. from:
Enter the start of the period in 4-digit for-
mat.
Suspend ring. until:
Enter the end of the period in 4-digit for-
mat.
¤ Press the display key §Save§.
Silencing the ringer for
anonymous calls
You can set the base to not ring when exter-
nal callers cannot be identified (anonymous
call).
v
¢
Ï
Settings
¢ Audio Settings
¢ Ringer Settings
Anon. Call Silencing
Select and press
§Change§.
If the ringer is silenced for anonymous calls,
then Anon. Call Silencing is marked
with ³.
Activating/deactivating the ringer
You can deactivate the ringer on your base
before you answer a call or when the base is
in idle status; the ringer can be deactivated
permanently or just for the current call.
The ringer cannot be re-activated while an
external call is in progress.
Deactivating the ringer permanently
* Press and hold the star key.
The
ó
icon appears in the display.
Reactivating the ringer
* Press and hold the star key.
Deactivating the ringer for the
current call
§Silence§ Press the display key.
Please note
During this period, you will continue to
receive calls on the base from numbers
to which you have assigned a personal-
ised melody in the directory (VIP).