Operation Manual

92
Configuring the system settings
Gigaset DL500A analog / IM-NORD EN / A31008-N3103-R201-2-7619 / settings.fm / 20.01.11
Version 4, 16.09.2005
If the date and time on the base have not yet
been set, the
§Time§ display key appears.
§Time§ Press the display key.
Or:
v ¢
Ï
Settings
¢ Date/Time
¤ You can enter data in the following fields:
Date:
Enter day, month and year as an 8-digit
number via the keypad. e.g., 4
Q2QQ for 14/01/2010.
Time:
Enter the hours and minutes in 4-digit
format via the keypad, e.g.,
QM5for 07:15 am.
¤ Press the display key §Save§ to save
the settings.
Protecting against
unauthorised access
Protect the base system settings with a PIN
known only to you. You have to enter the
system PIN if you register or de-register a
handset, change local network settings, per-
form a firmware update or reset the phone
to default settings.
Changing the system PIN
You can change the base's 4-digit system PIN
(default setting: 0000) to a 4-digit PIN known
only by you.
Setting a system PIN facilitates remote oper-
ation of the answering machine
(
¢ page 66).
v ¢
Ï
Settings
¢ System
¢ System PIN
~ If necessary, enter the current
system PIN for the base and
press
§OK§.
~ Enter new system PIN.
§OK§ Press the display key.
Setting your own area code
To transfer phone numbers (e.g., in vCards),
it is essential that your area code (interna-
tional and local area code) is saved on the
base.
Some of these numbers are already preset.
v
¢
Ï
Settings
¢ Tele phony
¢ Area Codes
Check that the (pre)set area code is correct.
¤ You can enter data as follows:
q Select/change input field.
r Navigate in the input field.
Ñ If necessary, delete number:
Press the display key.
~ Enter number.
§Save§ Press the display key.
Example:
Please note
It is especially necessary to set the inter-
national code if you connect a GSM
mobile to the base via Bluetooth. Phone
numbers transferred from the GSM net-
work always include the international
access code, even for calls within a coun-
try.
If, for example, you later wish to call back
the caller from a call list via one of your
phone's connections, the international
code is withheld for national phone calls.
Area Codes
International code:
00 - 45
Local area code:
0 - [ ]
Info Save