Operation Manual

96
Connecting the base to a PABX
Gigaset DL500A analog / IM-NORD EN / A31008-N3103-R201-2-7619 / PABX.fm / 20.01.11
Version 4, 16.09.2005
Connecting the base to
a PABX
The following settings are only necessary if
your PABX requires them; see the PABX user
guide.
Saving an access code
(outside line code)
Prerequisite: You must enter an access code
for external calls using your PABX, e.g., "0".
v
¢
Ï
¢ Tele phony ¢ Access Code
¤ You can enter data in the following fields:
Access external line with:
enter or change the access code, max.
three digits.
For:
Call Lists
The access code is put in front of numbers
dialled on the base or a handset from one
of the following lists:
– The SMS list
– The accepted calls list
– In the missed calls list
– An answering machine list
All Calls
The access code prefixes all numbers
dialled on the base or a handset.
Off
The access code is deactivated. It does
not prefix any phone number.
§Save§ Press the display key.
Setting pauses
Changing the pause after line
seizure
You can change the length of the pause that
is inserted between picking up the receiver
c and sending the number.
v Open the main menu.
*#Q5#L
Press keys in sequence.
~ Enter number for the length of
the pause (1 = 1 sec.; 2 =3secs;
3 = 7 secs) and press
§OK§.
Changing the pause after recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
v Open the main menu.
*#Q5#2
Press keys in sequence.
~ Enter a digit for the length of the
pause (1 =800ms; 2 = 1600 ms;
3 = 3200 ms) and press
§OK§.
Changing a dialling pause (pause
after access code)
v Open the main menu.
*#Q5#
Press keys in sequence.
~ Enter a digit for the length of
the pause (1 = 1 sec.; 2 = 2 sec.;
3 = 3 sec.; 4 = 6 sec.) and
press
§OK§.
Inserting a dialling pause:
¤ Assign the function Insert P
(
¢ page 85) to one of the programma-
ble keys.
¤ When entering the phone number, at the
point at which a dialling pause is to be
inserted, press and hold this function key
until a P appears in the display (approx.
2 seconds).
Please note
u You cannot send or receive SMS mes-
sages on PABXs that do not support
Calling Line Identification.
Please note
The access code never prefixes any emer-
gency numbers or SMS service centre
numbers.