User guide

37
ECO DECT
Gigaset S790 / BRD-SEN EN / A31003-G2100-U112-3-7419 / registr_sett.fm / 06.07.2011
Version 4, 16.09.2005
DeutschEnglish
ECO DECT
You are helping to protect the environment
with your Gigaset S400 professional.
Reducing energy consumption
By using a power-saving adapter plug, your
telephone consumes less power.
Reducing radiation
The radiation from your telephone is
reduced automatically:
u The handset's transmission power is
reduced depending on the distance to
the base.
u The transmission power on the base is
reduced to virtually zero when only one
handset is registered and the handset is
placed in the base.
You can reduce the radiation from the
handset and base even more by using Eco
Mode or Eco Mode+.
u Eco Mode
reduces the base's transmission power by
80% in standby and talk mode.
u Eco Mode+
reduces the base and handset's transmis-
sion power by 100% when the phone is
not being used to make or receive a call.
Eco Mode / Eco Mode+ can be activated/
deactivated independently of one another
and can also be used with multiple handsets.
The handset must not be placed in the base.
Activate/deactivate Eco Mode /Eco
Mode+:
v ¢
Ï
¢ Eco Mode
¢ Eco Mode / Eco Mode+
§Change§ Press the display key (³=on).
Status displays
Display icon
ÐiÑÒ
|
Signal strength:
– good to poor
– no signal
Ð white Eco Mode deactivated
Ð green Eco Mode activated
¼ white Eco Mode+ activated
(displayed instead of the
reception strength icon
when in idle status)
¼ green Eco Mode and Eco
Mode+ activated
Please note
u With Eco Mode+ activated, press and
hold the talk key c to check that the
base can be reached. You will hear the
dialling tone if the base can be
reached.
u When Eco Mode+ is activated:
– Call setup is delayed by approx.
two seconds.
– Handset standby time is reduced
by approx. 50%.
u Registering handsets that do not sup-
port Eco Mode+ will cause the mode
to be deactivated on the base and all
other handsets.
u Activating Eco Mode reduces the
range of the base.
u Eco Mode / Eco Mode+ and repeater
support (
¢ page 52) cancel each
other out, i.e., if you use a repeater,
you cannot use Eco Mode or Eco
Mode+.