User guide

44
Using Bluetooth devices
Gigaset S790 / BRD-SEN EN / A31003-G2100-U112-3-7419 / registr_sett.fm / 06.07.2011
Version 4, 16.09.2005
Using Bluetooth devices
Your handset Gigaset S400 professional can
communicate wirelessly via Bluetooth™ with
other devices using this technology.
Before you can use your Bluetooth devices,
you must first activate Bluetooth and then
register the devices to the handset.
You can register 1 Bluetooth headset to the
handset. You can also register up to 5 data
devices (PC, PDA) to send and receive direc-
tory entries as vCards or exchange data with
the computer (
¢ page 60).
To use the phone numbers, dialling codes
(country and area code) must be stored in
the directory (
¢ page 51).
You will find a description of how to operate
your Bluetooth devices in the user guides for
these devices.
Activating/deactivating Bluetooth
mode
v ¢ ò ¢ Activation
Press §Change§ to activate or deactivate Blue-
tooth mode (³ = activated).
In idle status, the ò icon on the handset
shows that Bluetooth mode is activated
(
¢ page 3).
Registering Bluetooth devices
The distance between the handset in Blue-
tooth mode and the activated Bluetooth
device (headset or data device) should be no
more than 10 m.
v
¢ ò ¢ Search for Headset /
Search Data Device
The search can take up to 30 seconds.
Once the device has been found, its name is
shown on the display.
§Options§ Press the display key.
Trust Device
Select and press
§OK§.
~ Enter the PIN for the Bluetooth
device you want to register and
press
§OK§.
The device is saved in the list of known
devices.
Cancelling/repeating current search
To cancel search:
§Cancel§ Press the display key.
Repeat search if necessary:
§Options§ Press the display key.
Repeat Search
Select and press
§OK§.
Please note
u You can operate headsets on your
handset that have the headset or
handsfree profile. If both profiles are
available, the handsfree profile is used
to communicate.
u It can take up to 5 seconds to estab-
lish a connection between your hand-
set and a Bluetooth headset. This
applies both when a call is accepted
using the headset or transferred to
the headset, and when a number is
dialled from the headset.
Please note
u If you register a headset, any headset
that is already registered is overwrit-
ten.
u If you would like to use a headset with
your handset that is already regis-
tered to another device (e.g., to a
mobile phone), please deactivate this
connection before you start the regis-
tration process.