User guide

52
Setting the base
Gigaset S790 / BRD-SEN EN / A31003-G2100-U112-3-7419 / registr_sett.fm / 06.07.2011
Version 4, 16.09.2005
Example:
Restoring the handset
default settings
You can reset individual settings and
changes that you have made.
The following settings are not affected by a
reset:
u Registration to the base
u Date and time
u Entries in the calendar
u Entries in the directory, the call lists and
the content of the resource directory
v
¢
Ï
¢ System ¢ Handset Reset
§Yes§ Press the display key.
Setting the base
The base settings are carried out using
a registered Gigaset S4 professional
handset.
Activating/deactivating
music on hold
v ¢
Ï
¢ Audio Settings
¢ Music on hold
Press §Change§ to activate or deactivate the
music on hold (³ = on).
Repeater support
With a repeater, you can increase the range
and signal strength of your base. You will
need to activate repeater mode. This will ter-
minate any calls that are in progress at the
time.
Prerequisite: A repeater is registered.
v
¢
Ï
¢ System ¢ Repeater Mode
Press §Change§ to activate or deactivate
repeater mode (³= on).
After activating or deactivating the
repeater, switch your handset off and
on again (
¢ page 21).
Area Codes
International code:
00 - 49
Local area code:
0 - [ ]
Û
Save
•
Please note
u Eco Mode / Eco Mode+ (¢ page 37)
and repeater support cancel each
other out, i.e., if you use a repeater,
you cannot use Eco Mode or Eco
Mode+.
u Encrypted transmission activated at
the factory is deactivated when a
repeater is registered.
•
•