User guide

59
Appendix
Gigaset S790 / BRD-SEN EN / A31003-G2100-U112-3-7419 / appendix.fm / 06.07.2011
Version 4, 16.09.2005
DeutschEnglish
Base power consumption
In standby mode:
approx. 1.1 watt
During the conversation:
approx. 1.0 watt
General specifications
Pin connections on the telephone
jack
Writing and editing text
The following rules apply when writing text:
u Each key between Q and O is
assigned several letters and characters.
u Control the cursor with uvts.
Press and hold u or v to move the cur-
sor word by word.
u Characters are inserted at the cursor posi-
tion.
u Press the star key
*
to display the
table of special characters. Select the
required character and press the display
key
§Insert§ to insert the character at the
cursor position.
u Press and hold Q to O to enter dig-
its.
u Press display key Ñ to delete the char-
acter to the left of the cursor. Press and
hold to delete the word to the left of the
cursor.
u The first letter of the name of directory
entries is automatically capitalised, fol-
lowed by lower case letters.
Setting upper/lower case or digits
Repeatedly press the hash key # to
change the text input mode.
The active mode is indicated at the bottom
right of the screen.
DECT standard Is supported
GAP standard Is supported
No. of channels 60 duplex channels
Radio frequency range 1880–1900 MHz
Duplex method Time multiplex,
10 ms frame length
Channel grid 1728 kHz
Bit rate 1152 kbit/s
Modulation GFSK
Language code 32 kbit/s
Transmission power 10 mW, average power
per channel
Range Up to 300 m outdoors,
up to 50 m indoors
Base power supply 230 V ~/50 Hz
Environmental condi-
tions in operation
+5°C to +45°C, 20% to
75% relative humidity
Dialling mode DTMF (tone dialling)/
PD (pulse dialling)
1unused
2unused
3a
4b
5unused
6unused
3
2
1
4
5
6
123 Writing digits
Abc Upper case *
abc Lower case
* First letter in capitals, all others in lower case