Operation Manual

42
Using several handsets
Gigaset S670/S675 / IM-MEA En / A31008-M1904-A601-1-3T19 / registr_sett.fm / 13.8.07
Version 4, 16.09.2005
Using several handsets
Registering handsets
You can register up to six handsets to your
base station.
A Gigaset S67H handset can be registered
to up to four base stations.
Automatic registration of Gigaset
S67H to Gigaset S670/S675
Precondition: The handset must not
already be registered to a base station.
Registering the handset to the base sta-
tion occurs automatically.
¤ Place the handset in the base station
with its display facing forward.
Registration can take up to 5 minutes.
During this process, the registration pro-
cedure appears in the display and the
name of the base station flashes, e.g. base
station 1. When the handset has regis-
tered successfully, its screen displays its
internal number, e.g. INT 2 for internal
number 2. The handset is assigned the
lowest available internal number (1–6).
If all internal numbers 1–6 have been
assigned, number 6 is overwritten, pro-
vided the handset with the internal
number 6 is in idle status.
Manual registration of Gigaset S67H to
Gigaset S670/S675
You must activate manual registration of
the handset on both the handset and the
base station.
Once it has been registered, the handset
returns to idle status. The handset's inter-
nal number is shown in the display e.g.
INT 1. If not, repeat the procedure.
On the handset
v ¢ Ð ¢ Handset ¢ Register H/Set
s Select base station, e.g. Base 1
and press
§OK§.
~ Enter the system PIN of the
base station (the default is
0000) and press
§OK§. You will
see flashing on the display
e.g. Base 1.
On the base station
Within 60 sec. press and hold the registra-
tion/paging key on the base station
(page 2) (approx. 3 sec.).
Registering other handsets
You can register other Gigaset handsets
and handsets for other devices with GAP
functionality as follows.
On the handset
¤ Start to register the handset as
described in its user guide.
On the base station
Press and hold the registration/paging key
on the base station (page 2) (approx. 3
sec.).
Please note:
– Automatic registration is not possible when
the base station to which you wish to regis-
ter the handset is being used to make a call.
– Each key press interrupts the automatic
registration.
– If automatic registration does not work,
you will have to register the handset manu-
ally.
– You can change the name of the handset
(see page 45).