Operation Manual

46
Handset settings
Gigaset S670/S675 / IM-MEA En / A31008-M1904-A601-1-3T19 / registr_sett.fm / 13.8.07
Version 4, 16.09.2005
Activating the room monitor and
entering the destination number
v ¢ í ¢ Room Monitor
¤ Change multiple line input:
Room M.:
Select On to activate.
Call to:
External number: Select the number
from the directory (press display key
Ò) or enter it directly. Only the
last 4 digits are displayed.
Internal number: §Options§ ¢ INT
¢ §OK§ ¢ s (select handset or Call
All, if all registered handsets are to be
called)
¢ §OK§.
Level:
Set noise level sensitivity (Low or High).
¤ Press §Save§ to save the settings.
Changing set destination numbers
v ¢ í ¢ Room Monitor
s Scroll to the Call to: line.
X or §Delete§
Delete existing number.
¤ Enter number as described in "Activat-
ing the room monitor and entering the
destination number" (page 46).
Deactivating the room monitor
remotely
Preconditions: The phone must support
touch tone dialling and the room monitor
should be set for an external destination
number.
¤ Accept the call from the room monitor
and press keys 9 ;.
The room monitor function will deactivate
after the call ends. There will be no further
room monitor calls. The other room moni-
tor settings (e.g. no ringer tone) on the
handset will remain activated until you
press the display key
§OFF§ on the handset.
To reactivate the room function with the
same phone number:
¤ Turn on the activation again and save
with
§Save§ (page 46).
Handset settings
Your handset is preconfigured, but you
can change the settings to suit your indi-
vidual requirements.
Shortcuts for functions
and numbers
You can assign the left display key and
each of the digit keys Q and 2 to
O a number or a function. The right-
hand display key has already been
assigned a function. You can change the
assignment.
The number is then dialled or the function
started by simply pressing a key.
Assigning a digit key/left display key
Precondition: The digit key or the left dis-
play key has not yet been assigned a
number or a function.
¤ Press the display key } or press
and hold the digit key.
The list of possible key assignments is
opened. The following can be selected:
Quick Dial / Call-by-Call
Assign key to a number from the direc-
tory or call-by-call list.
The directory or call-by-call list is
opened.
¤ Select an entry and press §OK§.
If you delete or edit an entry in the
directory or call-by-call list, this has no
effect on the assignment to the digit/
display key.
Room Monitor
Assign key to the menu for setting and
activating the room monitor (see
page 45).