Extra Information

21
Description of new and updated functions
R key function for VoIP – Hook flash/call diversion
Gigaset IP Phones / IM-BELG EN / A31008-xxxx-xxxx-x-xxxx / description.fm / 3/23/09
Version 4, 29.10.2007
R key function for VoIP – Hook flash/call diversion
This section replaces/amends the sections "Web configurator – Defining recall key functions for VoIP
(hook flash)" in the user guide for your Gigaset VoIP phone.
Using your phone's Web configurator, you can assign a special feature of your VoIP provider
to the S key. Alternatively, you can use the S key for call diversion (call transfer).
Assigning the signal for a provider feature to the S key
To be able to use a special feature of your VoIP provider, your phone must send a specific
signal (data packet) to the SIP server. You can assign this "signal" to your phone's R key.
If you press the R key during a VoIP call the signal will be sent to the server.
Precondition:
u DTMF reminders via SIP info messages is activated, i.e. the SIP Info option on this web
page is activated.
u The S key is not used for call transfer, i.e. Use the R key to initiate call transfer with the SIP
Refer method. = No is set for call transfer (£ Page 22).
If one of these preconditions is not fulfilled, the field in the Hook Flash (R-key) area is hidden.
¤ Open the following Web page: Settings ¢ Telephony ¢ Advanced Settings.
Area Hook Flash (R-key)
¤ In the Application Type (maximum 31 characters) and Application Signal fields (maximum
15 characters), enter the data that you have received from your VoIP provider.
¤ Now select Set to save your settings.
The setting for the S key applies to all registered handsets.