Extra Information

Description of new and updated functions

Changes to phone setup process

Gigaset IP Phones / IM-BELG EN / A31008-xxxx-xxxx-x-xxxx / description.fm / 3/23/09

Version 4, 29.10.2007

Description of new and updated functions

Changes to phone setup process

This section amends the section "First steps – Making settings for VoIP telephony" in the user guide for

your Gigaset VoIP phone.

The procedures for "Making settings for VoIP telephony" have changed as follows.

1. Gigaset.net assistant:

After you have completed the VoIP configuration, i.e. after entering your user data for

your VoIP account, the Gigaset.net assistant is no longer started (the step "Entering

your name in the Gigaset.net directory" in the telephone user guide can be skipped). Af-

ter you have entered your user data, the handset reverts to idle status.

The Gigaset.net assistant is started when you open the Gigaset.net directory for the first

time (

£ Page 5). You can then enter your name in the Gigaset.net directory.

2. If a firmware update for your telephone is available in the Internet:

In this case, the message New firmware available is displayed if you press the flashing mes-

sage key after starting your handset and connecting the base.

Perform the firmware update (press the right display key

§Yes§). Once the update has

been completed (after approx. 3 minutes) the handset's idle display appears again and

the message key f flashes. If you press f, the following is displayed: Start wizard for

entry of VoIP connection data?. You can then start the connection assistant as described in

the user guide.

Starting the Gigaset.net assistant when first opening the Gigaset.net-