Operation Manual

53
Operating the Gigaset S810A base answering machine
Gigaset S810-S810A / Grossbritannien / A31008-M2306-L101-1-7619 / answering_m.fm / 04.08.2014
Version 4.1, 21.11.2007
¤ Now speak your announcement (at least
3 secs.).
Just as if making a call via the receiver,
place the telephone against your ear and
speak into the microphone at a normal
volume.
§End§ Press the display key to end the
recording.
Cancel recording with a or
§Back§. Restart
the recording with
§OK§.
After recording, the announcement is
played back for you to check. You can re-
record the announcement with
§New§.
Please note:
u Recording ends automatically if the max-
imum recording time of 100 seconds is
exceeded or there is a break in speech for
more than 2 seconds.
u If you cancel the recording, the pre-
recorded announcement is used again.
u If the answering machine's memory is
full, it will switch to Answer only mode.
¤ Delete old messages and the answer-
ing machine will automatically switch
back to Answer & record mode.
Repeat recording if required.
Playing back personal
announcements/ advisory
messages
v ¢
Ì
¢ Announcements
¢ Play Announcement /
Play Advisory Msg.
If you have not recorded a personal
announcement, the relevant pre-recorded
announcement is played.
Record a new announcement while playing
back the announcement:
§New§ Press the display key.
If the answering machine's memory is full, it
will switch to Answer only mode.
¤ Delete old messages and the answering
machine will automatically switch back
to Answer & record mode. Repeat
recording if required.
Deleting personal
announcements/ advisory
messages
v ¢
Ì
¢ Announcements
¢ Del. Announcement / Del. Advisory
Msg.
§Yes§ Press the display key to confirm
the prompt.
Once you have deleted your announcement,
the relevant pre-recorded announcement is
used again.
Playing back messages
The date and time of each message is logged
(provided this has been set,
¢ page 18) and
displayed during the playback. If Calling Line
Identification is activated, the caller's num-
ber is displayed. If the caller's number is
saved in the directory, their name is dis-
played.
Playing back new messages
New messages that have not yet been
played back are indicated on the display
with an icon and number:
The
?
f key on the handset and the display
on the base will flash. The number of new
messages is displayed on the base.
f Press the message key.
Answer. Mach.:
Select and press
§OK§.
If there are new messages, playback then
begins with the first new message. After the
last new message, you will hear the end tone
and an announcement stating how much
recording time remains.
If the message has been saved with the date
and time, you will hear an appropriate
announcement before playback begins.
•
Please note
Deleting announcements can take some
time.
•
Ã
02