Specifications

27
Making calls
Gigaset SL75 WLAN / en / A31008-M700-B112-1-7619 / telephony.fm / 24.4.06
Version05.08.2005
Call handset
s c Select handset from the list
and press the talk key.
Ending a call
a Press the end call key.
Call duration display
During calls, the call duration (hours, min-
utes, seconds) is displayed automatically.
Rejecting a call
Requirement: An incoming call is being
signalled.
a Press the end call key.
The caller will hear the busy tone.
Calling line identification
When a call is received, the number (e.g.
IP address, URI) of the caller is shown in
the display.
For calls from the fixed network, the caller
can withhold calling line identification or
not request it. In this case the number is
not displayed.
Call display
The caller's number (e.g. IP address, URI) is
displayed.
If the caller has arranged for their SIP pro-
vider to transmit their name (page 64),
this name is displayed instead of the
number.
If the caller's number is saved in your
directory or in the internal list, the name
of the directory entry/from the internal list
is displayed.
1 Ringtone icon
2 Number (e.g. IP address, URI)/received
name of the caller/name of the caller from
your directory or the internal list
Handsfree mode
In handsfree mode, instead of holding the
handset to your ear you can put it down,
e.g. on the table in front of you to allow
others to participate in the call.
Activating/deactivating handsfree
operation
¤ You should inform your caller before
you use the handsfree function so that
they know someone else is listening.
Activating while dialling
¤ After entering the number, press the
handsfree key d.
Note:
For toggling (page 33) and for a conference
(page 33), the duration of the total call is dis-
played.
Å
[e-mail]
§Reject§ §Silence
1
2