Specifications

63
Creating/managing access profiles
Gigaset SL75 WLAN / en / A31008-M700-B112-1-7619 / settings_net.fm / 24.4.06
Version05.08.2005
If required, specify the parameters for
authentication and the type of encryp-
tion.
Setting up authentication with 802.1x
Requirement: You have set 802.1x as
Authentication.
¤ Make an entry on several lines
(page 120):
EAP Type
Select LEAP / TLS. The relevant input
fields are displayed.
Set up LEAP:
Login Name
Enter login name.
Password
Enter password.
Set up TLS:
Login Name
Enter login name.
Password
Enter password.
Certificate
Select certificate.
¤ If required, set up encryption with WEP
or WPA PSK (page 63).
¤ Save changes (page 121).
Setting up encryption with WEP
Requirement: You have set None / 802.1x
as Authentication.
¤ Make an entry on several lines
(page 120):
Encryption Type
Select WEP 64 / WEP128.
Password mode
Select HEX / ASCII.
WEP Key
Enter WEP key.
Authenticat. mode
Select Shared Key / Open System.
¤ Save changes (page 121).
Setting up encryption with WPA PSK
Requirement: You have set None / 802.1x
as Authentication.
¤ Make an entry on several lines
(page 120):
Encryption Type
WPA PSK TKIP is set.
Password mode
ASCII is set.
Pre-Shared Key
Enter WPA PSK key.
¤ Save changes (page 121).
Setting up authentication and encryption
with WPA
Requirement: You have set WPA as
Authentication.
¤ Make an entry on several lines
(page 120):
Security
TKIP is set.
EAP Type
Select LEAP / TLS. Proceed as described
under "Setting up authentication with
802.1x" (page 63).
¤ Save changes (page 121).
Note:
If you have selected authentication 802.1x with
EAP Type = LEAP, you must also set up encryp-
tion.
Notes:
– You may have to save the appropriate cer-
tificate in the handset. To do this, use the
Web configurator Web interface
(page 101).
– For authentication via certificates, the date
must be correctly set on the handset.
Note:
If the standard 802.1x with EAP type LEAP is
used for authentication, it is not necessary to
enter a Web key.