Operation Manual

14
First steps
Gigaset SL78H / IM1 en / A31008-M2058-R101-4-4N19 / starting.fm / 19.01.2011
Version 4, 16.09.2005
Display in idle status
Once the phone is registered and the time set, the idle
display is shown as in this example. After successful reg-
istration the following is displayed:
u the strength of the reception signal between base
and handset:
– good to poor: ÐiÑÒ
– no reception: |
u battery charge status:
outside the charger
– U white: charged over 66 %
– V white: charged between 33 % and 66 %
– ewhite or red
*
: charged under 33 %
– =flashes red: battery almost empty (less than 10 minutes talktime)
in the charger
– = e V U white: battery is charging
*
red: older firmware version, please update the handset’s firmware (¢page 52)
Your phone is now ready for use!
Connecting the USB data cable
You can connect a standard USB data cable with
a mini-B connector to the back of your handset
to connect the handset to a PC. To use this func-
tion, the Gigaset QuickSync software must be
installed (
¢ page 51).
¤ Remove the belt clip (if fitted) (¢page 9).
¤ Remove the battery cover (¢ page 9).
¤ Connect the USB data cable to USB socket 1.
Please note
u The range icon is only displayed in idle status if Eco Mode+ is deactivated
(
¢ page 33).
u In idle status, the calendar display can be switched on and off (¢ page 33).
i V
INT 1
Oct 2008
07:15
Calls Calendar
Mo Tu We Th Fr Sa Su
01 02 03 04 05
06 07 08 09 10 11 12
13 14 15 16 17 18 19
20 21 22 23 24 25 26
27 28 29 30 31
1