Operation Manual

37
Making calls
Gigaset SL910/910A / MEA EN / A31008-M2300-A601-1-UZ19 / telefony.fm / 14.12.2011
Version 4.1, 21.11.2007
Is the telephone connected via a PABX/gateway?
(there is another device between the phone and the house connection)
¤ Reset the system: Briefly pull out the power plug. Reinsert the plug and wait until
the device restarts.
¤ Check the settings on the PABX and activate phone number display, if necessary.
To do this, search for terms such as CLIP, calling line identification, phone number
identification, caller ID, etc. in the system's user guide or ask the system manufac-
turer.
Further information on this topic can be found at: www.gigaset.com/service
Handsfree mode
You can configure various profiles for handsfree operation (¢ page 74).
¤ If you are going to let someone listen in, you should tell the other party that this
is happening.
Activating while dialling
¤ Enter the number, press c twice.
Switching between earpiece and handsfree mode
During a call, when establishing the connection and when listening to the answer-
ing machine (Gigaset SL910A only):
¤ Press c or touch [ † Speaker].
Place the handset in the charger during a call:
¤ Press and hold c while placing the handset in the charger and for a further
2seconds.
Switching to mute
Deactivate the handset's microphone during an external call. The other parties can-
not hear you, but you can still hear the other party.
Switch to mute, cancel muting (activate/deactivate microphone):
¤ Touch [ – Mute].
Security check
The handset detects unsecured connections to the base, where third parties could
listen in.
When establishing an external call or during an external call:
¤ Press and hold any position on the status bar.
If Secure connection to base is displayed, the connection is secure.
If No secure connection to base is displayed, you should end the call.