Operation Manual

47
Sending and receiving SMS messages (text messages)
Gigaset SL910/910A / MEA EN / A31008-M2300-A601-1-UZ19 / sms.fm / 14.12.2011
Version 4.1, 21.11.2007
Sending and receiving SMS messages (text messages)
*
Your device is supplied ready for you to send text messages immediately.
Prerequisites:
u Calling Line Identification is enabled.
u Your network provider supports SMS within the fixed line network.
u To receive SMS messages, you must be registered with your network provider.
Writing/sending SMS
Your system can send a linked SMS (made up of up to four individual SMS mes-
sages) as one message. Linking occurs automatically.
¤ Write an SMS: Open the Applications menu. ¤ [ Write Text Message]
¤ Touch the To field. ¤ Enter the recipient's number with area code. ¤ Confirm
with è.
¤Touch the Message field. ¤ Enter the SMS text (enter text and special
characters,
¢ page 26). ¤ Confirm with è.
¤ Send an SMS: Touch [ Send].
Draft message list, temporarily storing an SMS while writing
You can later change and send SMS messages that are stored temporarily. You are
writing an SMS (
¢ page 47):
¤ End text input with è. ¤ Touch [ èSave].
Opening an SMS from the draft message list
¤ Open the Applications menu. ¤ [ Write Text Message] ¤ [ ;Drafts]
¤ Touch the entry in the draft message list.
You can delete the SMS ([ ü Delete]) or continue writing ([ N Edit], ¢ page 47).
* Important information: ¢ page 1
·
· ¢
Please note
In the case of an external call, or if you interrupt writing by more than 3 minutes,
the text is automatically saved in the draft message list. If the memory is full, the
SMS is deleted.
·