Operation Manual

52
Operating the Gigaset SL910A base answering machine
Gigaset SL910/910A / MEA EN / A31008-M2300-A601-1-UZ19 / answering_m.fm / 14.12.2011
Version 4.1, 21.11.2007
Operating the Gigaset SL910A base answering
machine
Operating via the handset
Set the answering machine using the status page (¢page 23) or the Answer
Machine submenu:
¤ Open the Settings menu (¢ page 24). ¤ [
¶
Answer Machine]
¤ If necessary, scroll to the desired function.
Activating/deactivating the answering machine and setting the
mode
¤ Activation: You activate/deactivate the
answering machine with the button.
¤ Mode: The options are:
– Announcement: Caller hears
announcement, can leave a message;
– Advisory Message: Caller hears
announcement, cannot leave a mes-
sage;
– Time Control: Activate Announce-
ment mode for a fixed time of day,
outside this time, Advisory Message
is activated.
Touch the corresponding area (activated
mode is highlighted).
In the case of Time Control, the following
fields are displayed (time must be set):
¤ Announcement from / Advisory Message from: Touch corresponding ’.
¤ Specify the time (¢ page 16) when the appropriate mode should be acti-
vated.
¤ Go back with ‘.
If no personal announcements are available, the default announcements are used.
Recording, playing back, deleting announcements/advisory
messages
Recording a new announcement deletes the announcement previously saved.
¤ Open the [
¶
Answer Machine] submenu (¢ page 52). ¤ If necessary, scroll
to Announcement / Advisory Message.
¤ Touch the ’ next to Announcement
/ Advisory Message.
Recording
¤ Touch [ ý Record own] / [ ý Re-Record]. ¤ Record the announcement after
the ready tone (at least 3 seconds, up to a maximum of 180 seconds).
¤ Complete with [End].
[ ¶Answer Machine] submenu
Activation
on
Mode
Announce-
ment
Advisory
Message
Time
Control
Only for Mode = Time Control
Announcement from
M
00:00
Advisory Message from
M
00:00
´