Operation Manual

Setting up the handset

Gigaset SL910/910A / MEA EN / A31008-M2300-A601-1-UZ19 / settings-pabx.fm / 14.12.2011

Version 4.1, 21.11.2007

Activating/deactivating auto answer

In the case of auto answer, the handset accepts an incoming call, as soon as you

take it from the charger. In the same way, the connection ends when you place it in

the charger.

¤ In the Settings menu (¢ page 24), touch [ « Telephony]. ¤ Activate/deacti-

vate the function with the button to the right of Auto Answer.

Changing the earpiece, handsfree and headset volume

The volume of the mode currently in use (handsfree, earpiece headset) is changed.

During a call:

¤ Touch [ R Volume]. ¤ Adjust the volume with Ô/Ó.

¤ If a headset is connected: To adjust the Microphone Sensitivity, if necessary

touch Ô/Ó in the second row several times.

¤ Touch at the bottom of the display to save the settings. Automatic saving

occurs after approx. 2 seconds.

Setting a handsfree profile

You can set various handsfree profiles to optimally adapt your phone to your envi-

ronment.

Profile 1

The optimum setting for most connections.

Profile 2

Optimum volume in handsfree mode. However, this means that the participants

cannot speak at the same time as the person speaking is given preferential

transmission (making two-way conversations difficult).

Profile 3

Optimises two-way conversations, both callers can hear each other, even if they

talk at the same time.

Profile 4

Optimised for special connections. If the preconfigured Profile 1 does not pro-

vide optimum sound, please try with Profile 4.

During an external call in handsfree mode:

¤ In the option slider, touch and then [ Ž Speaker Profiles]. ¤ Select the pro-

file to be used with immediate effect.

Please note

The handset's standby time can be significantly reduced if the display backlight

is activated.