Operation Manual

92
Accessing additional functions via the PC interface
Gigaset SL910/910A / MEA EN / A31008-M2300-A601-1-UZ19 / appendix.fm / 14.12.2011
Version 4.1, 21.11.2007
Accessing additional functions via the PC interface
To enable your handset to communicate with a PC, the "Gigaset QuickSync
(Version 7 or higher)" program must be installed on your PC (free to download
and more information at www.gigaset.com/gigasetSL910
).
This program allows you to use Bluetooth (¢ page 58) or a USB connection
between the PC and handset (
¢ page 6) to update the handset firmware and use
other functions, e.g.
u Synchronise the Contacts list on your handset with your PC's Outlook contacts
u Load caller pictures to the handset from the PC
u Download pictures as a screensaver from the PC to the handset
u Download sounds (ringtones) from the PC to the handset
Make outgoing calls and accept incoming calls. The display on the handset behaves
in the same way as if the call were being handled directly on the handset.
You can save the following image and sound formats on your handset:
A detailed description can be found in the help file to Gigaset QuickSync.
Format
Sound
– Ringtones
– Imported sounds
Internal
WMA, MP3, WAV
Picture
– Caller picture
– Screensaver
BMP, JPG, GIF
320 x 225 pixels
320 x 480 pixels
Please note
u If the USB data cable is plugged in, a Bluetooth connection cannot be estab-
lished. If it is plugged in during an existing Bluetooth connection, this is can-
celled.
u Using a USB connection with a power supply of 500 mA. the handset's bat-
tery is charged.
On USB connections with lower charging currents, the handset's battery
is discharged!