Specifications

28
U
sing a handset as a room monitor
Using a handset as a room monitor
If room monitor mode is activated, the saved destination number is called as soon as a defined noise
level is exceeded in the vicinity of the handset. You can save an internal or external number in your
handset as the destination number.
The room monitor call to an external number is cancelled after approx. 90 seconds, even if the call is
accepted. The room monitor call to an internal number is cancelled after approx. 3 minutes (depend-
ing on the base). When the room monitor is activated, the talk and menu keys are locked. The hand-
set's speaker is deactivated.
When room monitor mode is activated, incoming calls are only indicated on the display (without a
ringtone and silent alert). The display backlight is reduced to 50%. Advisory tones are deactivated.
A paging call is only signalled visually.
If you accept an incoming call, the room monitor mode is suspended for the duration of the call, but
the function remains activated.
The room monitor is not deactivated by switching the handset off and on again.
Changing the settings
¤ In the Applications menu, touch [
Ç
Room Monitor].
¤ Touch [ N Edit].
¤ Select the sensitivity (Hi
gh or Low) and destination for the room monitor call
(Internal or External).
¤ Touch ’ next to Number:
In the case of Forward alarm to Internal: Select the destination from the list of internal partici-
pants.
In the case of Forward alarm to External: Enter the destination number.
¤ Confirm with è. ¤ Touch [ è Save].
Activating the room monitor
¤ Push the button at the top of the display to the right.
Cancelling/deactivating the room monitor
When the room monitor is activated: Press a.
Deactivating in idle status: Push the button to the left.
Deactivating the room monitor remotely
Prerequisite: The room monitor call is diverted to an external destination number. The recipient's
phone supports tone dialling.
¤ Accept the room monitor call and press buttons 9 ;.
The call is ended. The room monitor is deactivated and the handset is in idle mode.
Warning
– Please check the functionality when you switch on. For example, test its sensitivity. Check the connec-
tion if you are diverting the room monitor to an external number.
Please note that the room monitor is only activated 20 seconds after being switched on.
– Activating the function reduces the operating time of your handset. If necessary, place the handset in the
charger.
– The handset should be positioned 1 to 2 meters away from the baby. The microphone must be pointed
towards the baby.
– The connection used by the room monitor must not be blocked by an activated answering machine.
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]