User guide

Setting the alarm

Gigaset SL910/910A / MEA EN / A31008-M2300-A601-1-UZ19 / applications.fm / 14.12.2011

Version 4.1, 21.11.2007

Setting the alarm

Prerequisite: The date and time have already been set (¢ page 16).

You can activate/deactivate and set the alarm using the status page (¢ page 23)

or as follows:

¤ In the Applications menu (¢ page 24), touch [ Ü Alarm].

¤ Activate/deactivate the alarm with the button at the top of the display.

¤ Touch [ N Edit] to change the settings for the alarm.

¤ Set the hour and minute for the wake-up time (time setting ¢ page 16).

¤ In the following line, select the weekdays when the alarm should sound.

¤ Touch the ’ next to Ringtone. ¤ Select a ringtone for the alarm call. ¤ Back

with ‘.

¤ Touch [ è Save] and confirm the security prompt.

An alarm call is signalled in the display and with the selected ringtone for a maxi-

mum of 180 seconds. During a call, the wake-up call is only signalled by a short

tone.

Deactivating the wake-up call/repeating after a pause

(snooze mode)

Prerequisite: A wake-up call is sounding.

¤ Deactivate: Touch Off.

¤ Snooze mode: Touch Snooze. The wake-up call is deactivated and then

repeated after 5 minutes. After the second repetition the wake-up call is deacti-

vated completely.

Screensaver, caller pictures and sound pool

The sounds/ringtones, caller pictures or pictures for the screensaver are managed

in the pools. Pictures and mono/polyphonic sounds are saved in your handset by

default. You can load additional pictures and sounds onto the handset from your PC

(

¢ page 92).

Viewing/deleting pictures

¤ In the Applications menu (¢ page 24), touch [ Õ Screensavers] / [ [ Caller

Pictures].

¤ Drag your finger from right to left or left to right over the display to view the indi-

vidual pictures.

¤ Delete picture: Scroll to the picture. ¤ Touch [ Delete]. ¤ Press Ye s to con-

firm.

Playing back sounds

¤ In the Applications menu (¢ page 24), touch [ î Sounds]. ¤ Select a sound.