Specifications

128
Operating with other devices
Gigaset SX353 / englisch / A31008-X353-B100-1-7619 / devices.fm / 08.10.2003
De-registering Bluetooth devices
Connecting wire-based analogue devices
The following internal number is provided for operation using analogue devices:
Int.21
The device connected to it must
◆ not be registered on the base station
◆ be set to tone dialling (DTMF) – pulse dialling is not supported
In addition, the corresponding device type must be set and device-specific additional
settings made.
No charges are displayed on the connected devices. However, ongoing charges are
recorded by the base station and can be queried using an added-feature handset or on
a PC.
Device types
The following settings are possible (Setting the device type, page 130).
i
Open the menu.
s Bluetooth
Select the menu item and confirm.
s De-reg. BTdevice
Select the menu item and confirm. A list of
registered Bluetooth devices is displayed.
s GSM phone
Select the device (e.g. GSM phone) and confirm.
The Bluetooth device is then de-registered.
OK
OK
OK
i
If necessary, on your GSM mobile phone or PC/PDA delete the base
entered during registration.
◆ Telephone
see Page 129, Connecting telephones
◆ Fax
see Page 129, Connecting a fax machine
◆ Modem
see Page 129, Connecting a modem
◆ Answering mach.
see Page 129, Connecting an answering machine
◆ Neutral
see Page 130, Connecting a fax machine
◆ Door type1
see Page 139, Setting up the entrance telephone
◆ Doortype2(DTMF)
see Page 139, Setting up the entrance telephone
◆ Ext. music/hold
see Page 130, Importing a waiting melody from an external
device
◆ No function
see Page 130, No device connected
i
Note the explanations below relating to the device types and their device-
specific additional settings.