Specifications

16
Preparing the base station for use
Gigaset SX353 / englisch / A31008-X353-B100-1-7619 / starting.fm / 08.10.2003
Setting the date and time:
Depending on the network provider, the date and time are adopted automatically from
the telephone network during the first outgoing call.
The display shows: Enter time?
If the time should be displayed in 12-hour mode, you can modify the setting later
(page 86).
Show/hide answering machine (on SX353isdn):
The answering machines AM1, AM2, and AM3 are available. You can use the answering
machine when it is shown. By factory default, only AM1 is shown (only AM1 is displayed
in the menus).
The display shows: Suppress display of AM1?
Respond with
◆ YES , if you want to hide AM1,
◆ with NO, if you want to use AM1.
This sequence will then be repeated for AM2 and AM3.
Entering your phone numbers (MSNs) and names for MSNs:
Many connections allow your telephone to request the MSN automatically upon
connection.
Precondition:You have a connection that supports this feature.
The display shows: Find own numbers (MSN)?
i
◆ The Getting started wizard cannot be used simultaneously by multiple
internal users.
◆ If there is already settings data (factory default or previous settings),
this data is shown at the appropriate positions in the display and can
be modified there.
◆ To cancel the Getting started wizard, press the exit menu key and
hold. All changes you have already saved using Save entry §§OK§§ are
retained. The base station returns to idle status.
◆ To skip a setting, press the display key §§NO§§.
[ RRRRRR RRRRRRR RRRRRRRR RRRRRR]
YES
Press the display key to set the date and time.
~
Enter the date (6-digit) and time (4-digit in 24-hour
mode) in series, e.g. 200903 0945 for 9/29/03 9:45
a.m..
W
Press the display key to open the submenu.
Save entry
Select the menu item and confirm.
OK
i
An answering machine can only be hidden if there are no messages/
memos stored in it (page 77).