Instruction manual

7
Setting the time functions
This oven has various time functions. Using the 0 button, the
menu is displayed and you can step from one function to
another. The time symbols remain lit up while settings are
programmed. The arrow
N shows the selected time function.
Using the
@ or A buttons it is possible to change the time
function that has already been set, as long as the time symbol
is indicated by the arrow
N.
Timer
The timer works independently of the oven. The timer has its
own beep. This can be used to distinguish whether the time set
for the timer or the automatic oven shut-off have finished
(cooking time).
1. Press the 0 button once.
On the display, the time symbols light, the arrow
N is in front
of the
V.
2. Set the timer using the @ or A buttons.
Value suggested for the
@ button = 10 minutes.
Value suggested for the
A button = 5 minutes.
The programmed time is shown after a few seconds. The time
set for the timer starts to count down. The
NV symbol lights up
on the display panel and the time elapsed is displayed. The
other time symbols switch off.
The time set for the timer has elapsed
A beep will sound. The display panel will show
‹:‹‹. Switch off
the timer using the
0 button.
Changing the time on the timer.
Change the time set for the timer using the
@ or A buttons. The
new time is shown after a few seconds.
Cancelling the timer
Resetting the timer to
‹:‹‹ with the button A. The new time is
shown after a few seconds. The timer switches off.
Viewing the time settings
If several time functions are programmed, the corresponding
symbols light up on the display panel. The arrow
N symbol is in
front of the time function in the foreground.
To view the timer
V, the cooking time x, the end time y or
the actual time
0, press the button 0 repeatedly until the
arrow
N reaches the required symbol. The corresponding value
will be shown for a few seconds on the display panel.
Cooking time
The oven allows you to set the cooking time for each type of
food. The oven switches off automatically when the cooking
time has finished. This avoids interrupting other tasks to switch
the oven off or exceeding the cooking time by mistake.
Example in the picture: cooking time: 45 minutes.
1. Select the type of heating using the function control knob.
2. Select the temperature or grill power level with the
temperature control knob.
3. Press the 0 button twice.
The display panel will show
‹:‹‹. The time symbols light up,
the arrow
N is situated in front of the x.
4. Set the cooking time with the @ or Abuttons.
Value suggested for the
@ button = 30 minutes.
Value suggested for the
A button = 10 minutes.
The oven will switch on after a few seconds. The display panel
shows the cooking time elapsed and the
Nx symbol is
displayed. The other time symbols switch off.
The cooking time has finished
A beep will sound. The oven will stop heating. The display
panel will show
‹:‹‹. Press the 0 button. Programme a new
cooking time with the
@ or A buttons. Or press the 0 button
twice and turn the function control knob to the zero setting. The
oven is off.
Changing the cooking time
Change the cooking time with the
@ or A buttons. The new
time is shown after a few seconds. If the timer has been
programmed, first press the
0 button.
Cancelling the cooking time
To reset the cooking time to
‹:‹‹ with the button A. The new
time is shown after a few seconds. The time has been
cancelled. If the timer has been programmed, first press the
0
button.
Viewing the time settings
If several time functions are programmed, the corresponding
symbols light up on the display panel. The arrow
N symbol is in
front of the time function in the foreground.
To view the timer
V, the cooking time x, the end time y or
the actual time
0, press the button 0 repeatedly until the
arrow
N reaches the required symbol. The corresponding value
will be shown for a few seconds on the display panel.