Specifications

GEMINI
2
Traffic Outstation Handbook
667/HB/32600/000 Page 234 Issue 11
17
Detector Flow Error
18
System Stopped *1
19
Power Fail *1 *2
20
MIS Failure *2
21
Checksum Failure *2
22
Safety 2 Red Lamps Out *3
23
Safety Red Lamp Out *3
24
Red Lamp Out *3
25
Amber Lamp Out *3
26
Green Lamp Out *3
27
Wait Lamp Out *3
28
Red Excess Current *3
29
Amber Excess Current *3
30
Green Excess Current *3
31
Wait Excess Current *3
32
Green No Output Voltage *3
33
Checksum Failure *3
*1 These faults are not reported by the OMCU since they do not appear in the
uncleared fault list produced by the RFL command.
*2 Mk I controllers only.
*3 Mk II controllers only.
13.6.9 GEC 3000 Fault Data (FLT GFL)
If the OMCU has detected a fault entry in the GEC 3000 controller’s own fault log then
the following fault data will be presented:
FORMAT: FLT:!GFL n
Where ‘n’ is a number representing the fault log report number:
NUMBER
FAULT DATA
0
(unused).
1
General fault header
2
Green conflict detected by software.
3
“ “ “ “ “
4
(unused).
5
(unused).
6
Current detector fault status
7
“ “ “ “
8
“ “ “ “
9
“ “ “ “
10
(unused).
11
(unused).
12
(unused).
13
(unused).
14
(unused).
15
Accepted detector fault status
16
“ “ “ “