Specifications

GEMINI
2
Traffic Outstation Handbook
667/HB/32600/000 Page 311 Issue 11
Code
Major
Index
Minor
Index
Data
Range
Description
Access
Level
IPR
-
-
1 or 2
IP Reset Command
Used to initialise communications
with the Instation via the Ethernet
port. For networks with automatic
address allocation, use IPR=1.
For networks with manual
address allocation, enter address
using IPM 0 etc and then use
IPR=2.
IPR=1 initiates an automatic
BOOTP sequence across the
network. If the request is not
successful it will retry
automatically every 10 minutes
(unless set to a different interval
by the BPR command).
IPR=2 activates the manual IP
address setting entered by the
IPM command.
Maint
IPB
-
-
ASCII
Name
BOOTP Server Name
Defines the name of the server
which will give the outstation an
IP address in response to a
BOOTP message (initiated by
IPR=1).
Maint
BPR
-
-
Time in
minutes
BOOTP retry timeout
Sets the BOOTP retry time used
by IPR=1. Factory setting is 10
minutes.
Maint
OID
-
-
ASCII
Outstation ID
Outstation ID string
Defines the outstation identity to
the system as a text string e.g.
X18120. The identity can be
allocated by the system when
communication is first
established, or it can be set by
the engineer when the unit is
installed. 32 characters
maximum, including the <space>
character. Default: (unset)
Maint
LDV
-
-
-
See page 315.
Maint