Specifications

GEMINI
2
Traffic Outstation Handbook
667/HB/32600/000 Page 312 Issue 11
Code
Major
Index
Minor
Index
Data
Range
Description
Access
Level
IPA
-
0 - 4
Number
IP Address
Displays the actual IP address
being used by the outstation
following IPR=1 or IPR=2
commands. Format as IPM
above.
RO
LOC
-
-
ASCII
Location
Outstation Location
Displays the location of the
outstation as a text string e.g.
PINHOE, ST MARKS. The
information may be set up by the
Instation so that the engineer can
confirm the location. 64
characters maximum. Default:
(unset)
RO
MAC
-
-
HEX
MAC
address
Ethernet MAC Address:
xx-xx-xx-xx-xx-xx
Displays the Ethernet MAC
Address of the outstation, as
defined in a protected section of
the processor card flash memory.
The address is allocated during
manufacture.
RO
LIF
-
-
ASCII
Facilities
code
Licensed Facilities Code
Set the licensed facilities code,
comprising a 6-character
alpha/numeric string.
Maint
LIN
-
-
nnnn nnnn
Licence
code
Licence Number Code
Set the licence number code,
comprising two 4-digit numbers
separated by a space. Values for
LIF and LIN can be obtained from
Siemens Poole. The serial
number of the CPU card will be
required (see HIC command).
If an outstation is replaced, then
new LIN and LIF numbers will be
required for the new CPU card.
LIN=9999 9999 can be used to
temporarily enable facilities while
a permanent licence number is
obtained. The temporary licence
will expire after 7 days.
Maint