Technical data

Lines 4 and 5 (CONTROL BITS)

Control bit Meaning

DIG-AUS

Address list for digital outputs exists

Table 5-4 continued:

URGELOE

Overall reset performed on CPU (COLD RESTART

required)

URL-IA

Overall reset being performed on CPU

STP-VER

CPU caused CP stop

ANL-ABB

RESTART aborted (COLD RESTART required)

UA-PG

PG has requested OVERALL RESET

UA-SYS

System program has requested OVERALL RESET (no

RESTART possible); OVERALL RESET must be

performed

UA-PRFE

OVERALL RESET requested owing to CPU error

UA-SCH

OVERALL RESET requested at hardware switch:

perform an OVERALL RESET or select a restart

type if you do not want to perform the requested

OVERALL RESET

The control bits in the following table indicate errors that can occur in

the RESTART (e.g. during an initial COLD RESTART) and RUN

(e.g. during time-driven program execution) modes.

If several errors occur,

all causes of interruptions that have occurred

up to now (and have not yet been processed) are displayed in the last

three lines of the control bits.