Technical data

5.5.2
DB1-FE (DB 1 Errors)
Error evaluating DB 1 to set up the address list for updating the
process image.
•• DB 1 does not exist in multiprocessor operation,
or
•• incorrect DB 1 address list during COLD RESTART.
Note
In multiprocessor operation, the system checks whether DB 1
exists in
all types of restart. DB 1 parameters are, however, only
evaluated during a COLD RESTART.
Error identifier
RS 3 RS 4
Explanation
0410H yyyyH
Illegal identifier:
- header identifier missing or incorrect
(correct KC MASK01)
- identifier illegal (permitted KH DE00,
DA00, CE00, CA00, BB00)
- end identifier missing or incorrect (correct
KH EEEE)
yyyy = illegal identifier
0411H yyyyH
"Digital inputs", number of addresses illegal
(permitted 0...128)
yyyy = illegal number of addresses
0412H yyyyH
"Digital outputs", number of addresses illegal
(permitted 0...128)
yyyy = illegal number of addresses
0413H yyyyH
"IPC flag inputs", number of addresses illegal
(permitted 0...256)
yyyy = illegal number of addresses
0414H yyyyH
"IPC flag outputs", number of addresses
illegal (permitted 0...256)
yyyy = illegal number of addresses
0415H yyyyH
Illegal number of timers
(permitted: 256)
yyyy = illegal number of timers
0419H yyyyH
Timeout with digital inputs
yyyy = address of the unacknowledged
input byte
Table 5-11 IDs for DB 1 errors
Errors during RESTART
CPU 928B Programming Guide
5 - 34 C79000-B8576-C898-01