Technical data

7.2.1

Example of DX 0

When assigning parameters in DX 0, remember the following points:

•• You can enter individual fields in any order.

•• You do not need to specify fields you are not going to use.

•• If a field exists more than once, the field you enter last is valid.

•• You can enter individual parameters in any order.

•• You do not need to specify parameters you are not going to use.

•• If a particular parameter is specified several times, the parameter

last specified is valid.

Start ID DW 0: KH = 4D41

DW 1: KH = 534B

DW 2: KH = 5830

Field ID/length DW 3: KH = 0101

Parameters (occupies 1 DW) DW 4: KH = 1001

Field ID/length DW 5: KH = 0402

Parameters (occupies 2 DW) DW 6: KH = 1000

DW 7: KH = 0040

End ID DW10: KH = EEEE

Field 1

Field 2

Structure of DX 0

CPU 928B Programming Guide

C79000-B8576-C898-01

7 - 7