Instruction manual

Bulletin 700-P
Heavy-Duty Industrial Relays
9-120
www.ab.com/catalogs Preferred availability cat. nos. are b
bold
.
Publication A117-CA001A-EN-P
Product Selection
0
1
2
3
4
5
6
7
8
9
10
11
12
13
Mechanical Latching Relays
 Factory-Assembled Bulletin 700-PL Latching Relays
 Converts all poles to latching
 AC latch coil — max. six poles latching
 DC latch coil — max. five poles latching
 Latching relays have two coils — latch coil is the relay coil, reset coil is on the latch attachment
 Latch/reset coils can have two AC coils, two DC coils, or one AC and one DC coil (e.g., latch with AC power, unlatch
with DC battery)
Bulletin 700-P Standard Contact Cartridge1
AC-Operated Relays DC-Operated Relays
Contacts
Contact Arrangement and Markings
Open Type
Relay Rail
Mount with
Mechanical
Latch
Attachment
(Read
ATTENTION
Below)
Contact Arrangement and Markings
Open Type
Relay Rail
Mount with
Mechanical
Latch
Attachment
(Read
ATTENTION
Below)
Open Type DIN
Rail Mount with
Mechanical
Latch
Attachment
(Read
ATTENTION
Below)
N.O. N.C.
Cat. No. Cat. No. Cat. No.
0— —
——— —
2—
6-Pole Relay
700-PL200⊗
⊗
5-Pole Relay
700DC-PL200⊗ 700DC-PL200D⊗
4—
700-PL400⊗
⊗
700DC-PL400⊗ 700DC-PL400D⊗
6—
700-PL600⊗ 700DC-PL500⊗ 700DC-PL500D⊗
⊗AC Coil Voltage Code
The Cat. No. as listed is incomplete. Select a voltage suffix code from the table below to complete the Cat. No. Example: Cat. No. 700-
PL200
⊗
becomes Cat. No. 700-PL200A48. For other coil voltages, consult your local Rockwell Automation sales office or Allen-Bradley
distributor.
Relays with latch attachments: if the latch attachment coil is to be a different voltage other than the relay coil, add a second coil code suffix.
Example: Cat. No. 700-PL400A1A24. Only one suffix is required if both coils are the same voltage.
Hz 24 48 110 110-115 115-120 120 127 200-208 220-230 230-240 277 347 380 415 440-480 460-480 500 575-600
50 B24 B48
A1

B11
— — B27 — B22 B2 — — B3 B41 B44 — B50 —
60
A24 A48 — —
A1

B11
— A20 A22 A2 A27 A35 — — — A4 — A6
 Optimized for 115…120V, 60 Hz. Operates satisfactorily at 110V, 50 Hz.
 Optimized for 110…115V, 50 Hz. Operates satisfactorily at 120V, 60 Hz.
⊗DC Coil Voltage Code
The Cat. No. as listed is incomplete. Select a voltage suffix code from the table below to complete the Cat. No. Example: Cat. No. 700DC-
PL200
⊗
becomes Cat. No. 700DC-PL200Z12. For other coil voltages, consult your local Rockwell Automation sales office or Allen-Bradley
distributor.
6 12 18 24 32 48 64 72 90 115-125 230-250 500-550 575-600
Z06 Z12 Z18
Z24
Z32 Z48 Z64 Z72 Z90 Z1 Z2 Z5 Z6
ATTENTION – An open or failed unlatch control circuit will fail to unlatch the relay. For this reason, a mechanical latch unit should not be used where protection is
needed against automatic restart after a power failure or where reliability to a control function is critical to safety.
1 Normally closed contacts: The normally open contacts can easily be changed to normally closed in the field. Relays can be supplied with N.C. contacts.
 Overlap contacts: T
o order a relay containing one pair: Use Cat. No. 700-PTZ110. To order a relay containing two pairs: Use Cat. No. 700-PTZ2220. N.O.
contact closes before N.C. contact opens. AC Ratings: NEMA A600, DC Ratings: P161.
‡ Location of contacts in 2-pole relays.
§ Location of contacts in 4-pole relays: 2-pole relay plus the 2 contacts indicated.