Instruction manual

Bulletin 700-RTC
Sealed Switch Timing Relays
9-142
www.ab.com/catalogs Preferred availability cat. nos. are b
bold
.
Publication A117-CA001A-EN-P
Product Selection
0
1
2
3
4
5
6
7
8
9
10
11
12
13
Bulletin 700-RTC Relays with Fixed Time Delay— Relays with Provision for Instantaneous Contacts
Relays listed below have slots for two timed and two instantaneous contacts. Unused slots are equipped with removable dummy cartridges.
Number of Contact Cartridges
Open Type Without
Enclosure
Total
Timed Instantaneous
Cat. No.1N.O. N.C. N.O. N.C.
00000
700-RTC00#0⊗
1
1000
700-RTC10#0⊗
0100
700-RTC20#0⊗
2
2000
700-RTC40#0⊗
1010
700-RTC11#0⊗
1001
700-RTC12#0⊗
1100
700-RTC30#0⊗
0110
700-RTC21#0⊗
0101
700-RTC22#0⊗
0200
700-RTC50#0⊗
3
2010
700-RTC41#0⊗
1020
700-RTC14#0⊗
2001
700-RTC42#0⊗
1011
700-RTC13#0⊗
1110
700-RTC31#0⊗
0120
700-RTC24#0⊗
1002
700-RTC15#0⊗
1101
700-RTC32#0⊗
0111
700-RTC23#0⊗
0210
700-RTC51#0⊗
0102
700-RTC25#0⊗
0201
700-RTC52#0⊗
4
2020
700-RTC44#0⊗
2011
700-RTC43#0⊗
1120
700-RTC34#0⊗
2002
700-RTC45#0⊗
1111
700-RTC33#0⊗
0220
700-RTC54#0⊗
1102
700-RTC35#0⊗
0211
700-RTC53#0⊗
0202
700-RTC55#0⊗
1 Operating Mode
Replace the # in the cat. no. with the appropriate letter and numbers to indicate the operating mode and the fixed time delay value. Refer to operating mode
table below.
Digit Operating Mode Fixed Time Delay
S On-Delay – s Seconds –Two digits indicating the fixed time delay in seconds.
Three digits indicating the fixed time delay (first digit indicates seconds, next
two digits indicate 1/100 seconds).
Z Off-Delay – s
Y On-Delay – Min. Minutes –Two digits indicating the fixed time delay in minutes.
Three digits indicating the fixed time delay (first digit indicates minutes, next
two digits indicate 1/100 minutes).
I Off-Delay – Min.
Examples: Cat. No. 700-RTC00Y200U1 is for a relay without contact cartridges. “Y20” indicates an On-Delay timer with a 20 minute fixed
time delay. This is a “standard relay.” Order the contact cartridges separately. Cat. No. 700-RTC42S020U1 is for a relay with 2 N.O.
cartridges in the timed position and 1 N.C. cartridge in the instantaneous position. “S02” indicates an On-Delay timer with a 2 second fixed
time delay.
⊗ Coil Voltage Code
The cat. no. as listed is not complete. To complete the cat. no., add a coil code selected from the table below.
[V] 24V DC, 24V AC 120V DC, 110/120V AC
50/60 Hz U24 U1