Instruction manual

Bulletin 700-RTC
Sealed Switch Timing Relays
9-143
www.ab.com/catalogs Preferred availability cat. nos. are b
bold
.
Publication A117-CA001A-EN-P
Accessories
0
1
2
3
4
5
6
7
8
9
10
11
12
13
Description Cartridge Type Color Cat. No.
Contact Cartridges – These cartridges are used to
add contacts to timing relays having unused slots.
The N.O., N.C., and Dummy cartridges are
interchangeable and can be used in timed or
instantaneous contact slots. Dummy cartridges
should be placed in unused cartridge slots to guard
against entrance of foreign material.
N.O. Grey
700-CRT5
N.C. Orange
700-CRT6
Cat. No.
700-CRT5
Cat. No.
700-CRT6
Cat. No.
700-CR9
Dummy Cartridge Black
700-CR9
External Potentiometer – The potentiometer units
listed are recommended for timers with remote
potentiometer provision. Refer to catalog section on
Bulletin 800T or 800M for general construction
features.
Connection Cable – Use shielded twisted pair
cable, maximum of 50 feet. Recommended cable (or
equivalent): UL style 2517, having two #18 stranded
conductors with aluminum mylar foil shield and #20
drain wire. Rated 150 °C, FR-1, 300 volts.
Oiltight
1
800T-U90
Small Oiltight – Round‡
800MR-N37
Small Oiltight – Square§
800MS-N37
Cat. No. 800MR-N37
ATTENTION – If the recommended potentiometer and cable are not used, be certain that the
potentiometer and cable wiring is insulated from ground and circuit common for 300V RMS or greater.
Type 1 Enclosure — Use for all Bulletin 700-P, -PH, and -PK relays except 10- and 12-pole DC relays or
5- and 6-pole DC Bulletin 700-PH relays.
700-N31
Relay Rail
Simplifies panel layout. These indexed strips are
easily cut to the required length and bolted, riveted,
or spot-welded in place. Relays are installed
adjacent to one another on the mounting strip with
the captive mounting screws provided. Rows of
relays on Relay Rail form their own wiring trough.
Can be used with the following relays: 700P, 700-
PK, 700PH, 700S-P, 700N, 700-R, 700-RTC
Relays per Strip Pkg. Quantity
700-MP4
45
85
700-MP8
12 5
700-MP12
16 5
700-MP16
DIN (#3) symmetrical hat rail
35 x 7.5 x 1 m
10
199-DR1
Cat. No. 199-DR1
DIN Rail Adapter
Can be used with the following relays:
Bulletin 700P, 700-PK, 700-PH, 700S-P, 700-N, 700-R, 700-RTC
1
700-DRA
1 Legend plate, Cat. No. 800T-X609, must be specified when ordering.
 Add suitable 400 KΩ potentiometer
.
‡ Does not include legend plate.
§ Does not include legend plate. Contact your local Rockwell Automation sales office or Allen-Bradley distributor.
 To order a 700-RTC relay with the Remote Potentiometer Provision, add a "R" after the letters R
TC in the selected catalog number. Only a "U24" (24V AC/DC)
coil code is available with this option. For example: 700-RTCR00000U24.