Instruction manual

Bulletin 700-SA
Solid-State Relays
9-171
www.ab.com/catalogs Preferred availability cat. nos. are b
bold
.
Publication A117-CA001A-EN-P
Accessories
0
1
2
3
4
5
6
7
8
9
10
11
12
13
Description Pkg. Quantity Cat. No.
Screw Terminal Tube Base Socket — Panel or DIN Rail
Mounting; Guarded Terminal Construction. 8-Pin for use with
DPDT Bulletin 700-HA Relays.
10
700-HN100
Specialty Socket
8-pin backwired socket with solder terminals
10
700-HN108
Screw Terminal Tube Base Socket — Panel or DIN Rail
Mounting; Open Style Construction. 8-Pin for use with DPDT
Bulletin 700-HA Relays. No retainer clip required.
10
700-HN125
DIN (#3) symmetrical hat rail
35 x 7.5 x 1 m
10
199-DR1
Pre-Printed Identification Tags — contains 10 sheets of pre-
printed and blank tags. Each sheet contains 13 sets of the
markings CR…9CR, TR…9TR, M…9M, F, R, 1S, and 117 blank
tags. Tags are peel-off with sticky backing for easy placement
on relays.
10
700-N40
Blank Identification Tags — contains 10 sheets of blank
identification tags for customer specialized printing. Each sheet
contains 546 blank tags. Tags are peel-off with sticky backing
for easy placement on relays.
10
700-N41
Retainer Clip for Sockets with 700-SA AND 700-HB Relays.
Secures relay in socket.
10
700-HN158
8-Pin Socket — Can Be Used With or Without Timing
Module or Surge Suppressor. Screw Terminal Tube Base
Sockets — panel or DIN Rail mounting. Guarded terminal
construction. Used with DPDT Bulletin 700-HA Relays.
10
700-HN204