Instruction manual

Bulletin 900-TC
Digital Temperature Controller
9-205
Approximate Dimensions
0
1
2
3
4
5
6
7
8
9
10
11
12
13
Approximate Dimensions
Approximate dimensions are shown in millimeters unless otherwise indicated. Dimensions are not to be used for manufacturing purposes.
Bulletin 900-TC8
Group Mounted
Group mounting does
not allow UL Type
4X Waterproofing
2(
#/
MV
SV
PV
57$
57$
5612176
/#07 %/9176
57$
*#
79.2
6
112
48
96
Mounted Separately
60 min.
(Horizontal)
120 min.
(Vertical)
45
+0.5
0
+0.8
0
92
+0.8
0
92
(48 x number of units - 2.5)
+1.0
0
Panel Cutouts
Safety Terminal Cover1
 Recommended panel thickness is 1…8 mm.
 Group mounting is not possible in the vertical direction. (Maintain the specified mounting
space between controllers when they are group mounted. UL Type 4X is not possible when
group mounting.)
 To mount the unit so that it is waterproof, apply the waterproof gasket to the unit
 When two or more units are mounted together, make sure that the surrounding ambient
temperature does not exceed the allowable operating temperature specification.
10
1.2
3.2
44.8
Bulletin 900-TC16
6
99
91
58
91
78
6
1.5
48.8
44.8x
44.8
PV
SV
STOP
OUT2
8.8.8.8
C
8.8.8.8
SUB1
SUB2
HA
OUT1
CMW
MANU
48x48
(48 x number
of units - 2.5)
Mounted Separately
60 min.
(Horizontal)
60 min.
(Vertical)
Group mounting does
not allow IP66 UL Type 4X
waterproofing.
Group Mounted
45
+0.6
0
45
+0.6
0
45
+0.6
0
+1.0
0
Panel Cutouts
 Recommended panel thickness is 1…5 mm.
 Group mounting is not possible in the vertical direction. (Maintain
the specified mounting space between Controllers when they are
group mounted. IP66 UL Type 4X is not possible when group
mounting.)
 To mount the unit so that it is waterproof, apply the waterproof
gasket to the unit.
 When two or more units are mounted together, make sure that the
surrounding ambient temperature does not exceed the allowable
operating temperature specification.
Safety Terminal Cover
1
1 Conforms to VDE 0106 (finger protection) when installed on the controller.
Approximate dimensions are shown in millimeters unless otherwise indicated. Dimensions are not to be used for manufacturing purposes.
www.ab.com/catalogs Preferred availability cat. nos. are b
bold
.
Publication A117-CA001A-EN-P