Instruction manual

Bulletin 700-HB
General Purpose Relays
9-21
www.ab.com/catalogs Preferred availability cat. nos. are b
bold
.
Publication A117-CA001A-EN-P
Accessories
0
1
2
3
4
5
6
7
8
9
10
11
12
13
Description Pkg. Qty. Cat. No.
Diode Surge Suppressor
Voltage Range: 6…220V DC used with 700-HN153 socket
10
700-ADR
Diode with LED Surge Suppressor
Voltage Range: 6…24V DC used with 700-HN153 socket
10
700-ADL1R
Diode with LED Surge Suppressor
Voltage Range: 28…60V DC used with 700-HN153 socket
10
700-ADL2R
Diode with LED Surge Suppressor
Voltage Range: 110…220V DC used with 700-HN153 socket
10
700-ADL3R
Varistor with LED Surge Suppressor
Voltage Range: 6…24V AC used with 700-HN153 socket
10
700-AV1R
Varistor with LED Surge Suppressor
Voltage Range: 110…240V AC used with 700-HN153 socket
10
700-AV3R
RC Surge Suppressor
Voltage Range: 6…24V AC/DC used with 700-HN153 socket
10
700-AR1
RC Surge Suppressor
Voltage Range: 110…240V AC/DC used with 700-HN153 socket
10
700-AR2
Timing Module
On-Delay or One-Shot selectable voltage range:
12…24V AC/DC used with sockets that accept
plug-in accessory modules.
t
U (A1/A2)
LED & R
t
U (A1/A2)
LED & R
On-Delay
One-Shot
1
700-AT3
Timing Module
On-Delay or One-Shot selectable voltage range:
110…125V AC used with sockets that accept
plug-in accessory modules.
700-AT3A1
Timing Module
On-Delay or One-Shot selectable voltage range:
230…240V AC used with sockets that accept
plug-in accessory modules.
700-AT3A2
Multi-Function Multi-Range Time Module
Voltage range 12…240V AC 50/60 Hz and 12…240V DC, with a voltage variation of 85…110%.
Repeat accuracy of ±1%. Reset time <50 ms. For use with 700-HN153 socket. Refer to page 9-23
for Specifications.
1
700-HT3
Eight Timing Modes
Seven Timing Ranges:
1. 1 s 0.05 s…1 s
2. 10 s 0.5 s…10 s
3. 100 s 5 s…100 s
4. 10 min. 0.5 min…10 min
5. 100 min. 5 min…100 min
6. 10 hours 0.5 hr…10 hr
Cat. No. 700-HT3
7. 100 hours 5 hr…100 hr
8. LED Indicator
Screw Terminal Socket — Panel or DIN Rail Mounting. Guarded Terminal Construction
11-blade socket for use with Bulletin 700-HB relays. This socket has coil and contact separation
as well as the ability to use optional plug-in modules ( 700-A__ accessories, LED, surge
suppression, timing modules).
10
700-HN153
Cat. No. 700-HN153
Screw Terminal Base Socket — Panel or DIN Rail Mounting. Open Style Construction
11-blade for use with Bulletin 700-HB relays.
10
700-HN154
Cat. No. 700-HN154
DIN (#3) symmetrical hat rail
35 x 7.5 x 1 m
10
199-DR1
Cat. No. 199-DR1
Retainer Clip for Cat. No. -HN154 open terminal socket with 700-HB relays1
1
Secures relay in socket. Order must be for 10 clips or multiples of 10.
10
700-HN156
Sample Retainer Clips
Retainer Clip for Cat. No. 700-HN153 Sockets with 700-HB Relays
1. Secures relay in socket.
Order must be for 10 clips or multiples of 10.
10
700-HN158
1 See Bulletin 700-HB square base relay socket and retainer clip reference chart (see page 9-22).