Instruction manual
Bulletin 700-HD
General Purpose Relays
9-27
www.ab.com/catalogs Preferred availability cat. nos. are b
bold
.
Publication A117-CA001A-EN-P
Specifications
0
1
2
3
4
5
6
7
8
9
10
11
12
13
Specifications
Cat. No. 700-HD…
Electrical Ratings
Pilot Duty Rating
NEMA B300
Rated Thermal Curr
ent (
I
th
)
15 A‡ – 120V
15 A‡ – 240V
Rated Insulation V
oltage (U
i
)
250V IEC-300V UL/CSA
Contacts
Inductive
Make Break
Hp
2-Pole 3-Pole 2-Pole 3-Pole
120V AC 60 A 30 A 6 A 3 A 3/4
240V AC 30 A 15 A 3 A 1.5 A 2
General Purpose 15 A, 240V AC
Resistive 15 A, 30V DC
Min. Low Energy Permissible Load 1000 mW (10V, 10 mA)
Permissible Coil Voltage Variation
80…110% of Nominal Voltage at 50 Hz
80…110% of Nominal Voltage at 60 Hz
80…110% of Nominal Voltage at DC
Coil Consumption
±10%
AC Coils 50 Hz 60 Hz
Inrush 3.3 VA 2.85 VA
Sealed 2.2 VA 1.9 VA
DC Coils 1.3 W
Maximum Contact Resistance
50 mΩ
Must Dropout Voltage
20% of Nominal V AC
10% of Nominal V DC
Design Specification/Test Requirements
Electrical
Dielectric Withstand Voltage
Pole-to-Pole 1500V
Contact to Coil 6000V
Contact to Frame 4000V
Mechanical
Degree of Protection
(Open Type) IEC 529
IP 40
Mechanical Life Cycles (AC/DC) > 10 x 10
6
/ 30 x 10
6
Switching Frequency Operations 3600/HR
Coil Voltages See Overview/Product Selection
Operating Time
Pickup 20 ms
Dropout 4 ms
Maximum Operating Rate 4 Ops/s
Minimum Low Energy Permissible Load 1000 mN (10V, 10mA)
Environmental
Temperature
Operating –40…+70 °C
Storage –40…+100 °C
Altitude 2000 m (6560 ft)
Construction
Insulating Material Molded High Dielectric Material
Enclosure Transparent Dust Cover
Contact Material Silver Cad. Ox.
Terminal Markings In accordance with EN50 0005
Certifications
cURs Recognized (File No. E3125, Guide NLDX2/NLDX8), CSA Certified (File No. 229473), CE Marked, UR
Certified
Standards UL 508, CSA C22.2 No. 14, EN 61810-1, EN 60255-23
1 Performance Data – See this catalog, Important- 3
NEMA Rating Chart is on page 19 of publication 700-SG003*
‡ 3-pole relays have a 20 A maximum total current rating for all three poles.
Note: Bulletin 700-HD wiring terminals are the quick connect/solder type 4.7 x 0.5 mm (0.187 x 0.020 in.) termination.