Instruction manual

Bulletin 700-HL
Interposing/Isolation Relays
9-45
www.ab.com/catalogs Preferred availability cat. nos. are b
bold
.
Publication A117-CA001A-EN-P
0
1
2
3
4
5
6
7
8
9
10
11
12
13
Product Overview/Product Selection
 Relay and socket assembled interface modules for high density
interposing or isolation applications
 Screw terminal and spring-clamp bases
 6 A relay, choice of silver or gold contacts
 2 A solid-state relay — DC output
 1 A solid-state relay — AC output
 SPDT (relay), 1 N.O. (solid-state)
 Built-in retainer clip and snap-in marker lever
 Standard LED, reverse polarity protection, and surge protection ♣
 Exter
nally replaceable relay modules
 Unique leakage current suppression version to address industry
concerns of nuisance coil turn-on or contact non-drop out when
connecting to PLCs with leakage current
 Available with hazardous location certification
Table of Contents
Product Selection...... this page
Accessories.................. 9-46
Specifications.............. 9-49
Approximate
Dimensions................... 9-49
Standards Compliance
and Certifications
See Specification table in this
section, page 9-47.
Product Selection
Standard built-in Features:
 LED
 Reverse Polarity Protection
for DC Inputs
 Coil Surge Protection ♣
Cat. No. 700-HLT1Z24 Cat. No. 700-HLT2Z24 Cat. No. 700-HLS1Z24 Cat. No. 700-HLS11Z24
Specifications
A2
A1
12
11
14
Output Type
SPDT (1 C/O);
I
th
= 6A‡ 1 N.O. solid-state; I
th
= 2 A, 24V DC or I
th
= 1 A, 240V AC
Recommended Tightening
Torque
0.5 N• m max. (4.4 lb• in)
Wire Range Screw Terminal: 0.14 mm
2
…2.5 mm
2
(#26…#14 AWG), Spring Terminal: 0.2 mm
2
…2.5 mm
2
(#24…#14 AWG)
Approvals UL, cULus, cURus, ABS, CE
Bulletin 700-HL — "Terminal Block Relay"
Assembled Devices Pkg. Quantity
Cat. No.
(Screw Terminals)
Cat. No.
(Spring Clamp
Terminals) Pkg. Quantity
Cat. No.
(Screw Terminals)
(DC Output)
Cat. No.
(Spring Clamp
Terminals)
(DC Output)
Cat. No.
(Screw
Terminals)
(AC Output)
Input Voltage
12V DC 10

700-HLT1Z12 700-HLT2Z12
— — — —
24V DC 10

700-HLT1Z24 700-HLT2Z24
10

700-HLS1Z24 700-HLS2Z24 700-HLS11Z24
48V DC 10

700-HLT1Z48
700-HLT2Z48 10

700-HLS1Z48 700-HLS2Z48 700-HLS11Z48
12V AC/DC 10
700-HLT1U12
700-HLT2U12 — — — —
24V AC/DC 10
700-HLT1U24 700-HLT2U24
— — — —
48V AC/DC 10
700-HLT1U48 700-HLT2U48 — — — —
110/125V AC/DC 10
700-HLT1U1 700-HLT2U1
10

700-HLS1U1 700-HLS2U1 700-HLS11U1
220…240V AC/DC 10
700-HLT1U2 700-HLT2U2
10

700-HLS1U2
700-HLS2U2 700-HLS11U2
240V AC 10
700-HLT1A2
—— — — —
Built-in LCSC (leakage current
suppression circuit)
120V AC and 125V DC§
10

700-HLT1L1
—10

700-HLS1L1
—
700-HLS11L1
Built-in LCSC (leakage current
suppression circuit) 240V AC§
10

700-HLT1L2
—10

700-HLS1L2 — 700-HLS11L2
Hazardous Location
Certification 24V DC
10
700-HLT1Z24-EX
—10
700-HLS1Z24-EX
— —
Hazardous Location
Certification 12V DC
10
700-HLT1Z12-EX
—10 — — —
Hazardous Location
Certification 110/125V AC/DC
10
700-HLT1U1-EX
—10700-HLS1U1-EX — —
1 Reverse polarity on the output terminals of the solid-state relay will result in the output being "On" regardless of the state of the input voltage.
 Electromechanical relay to solid-state relay interchangeability is possible.
‡ For Gold-plated contacts: Add the letter “X” at the end of the catalog number. For example: if Cat. No. 700-HLT1Z24 is required with gold plating, the new cat.
no. is 700-HL
T1Z24X.
§ Leakage current suppression up to 2.2 mA off state current.
♣ Diode surge protection provided.