Instruction manual

Bulletin 700-FS
DIN Rail Mounted Timing Relays
9-69
www.ab.com/catalogs Preferred availability cat. nos. are b
bold
.
Publication A117-CA001A-EN-P
Function and Connection Diagrams
0
1
2
3
4
5
6
7
8
9
10
11
12
13
Connection Diagrams
(A) On-Delay
(B) Of
f-Delay (Min. Pulse AC 50 ms…DC 30 ms)
Output
LED
Output 1
Output 2
LED
1 C/O (SPST)
2 C/O (DPDT)
(C) On- and Off-Delay
(D) One Shot
(E) Fleeting Off-Delay (Min. Pulse AC 50 ms…DC 30 ms)
(F) Flasher (Repeat Cycle Starts with Pulse)
Output
LED
Output 1
Output 2
LED
1 C/O (SPST)
2 C/O (DPDT)
(G) Flasher (Repeat Cycle Starts with Pause)
1 C/O (SPST)
2 C/O (DPDT)
Output
LED
Output 1
Output 2
LED
(I) On-Delay Pulse Generator
(J) On-Delay (Pulse Controlled)
(On) ON-Function (Off) OFF-Function
(L) Pulse Converter (Min. Pulse AC 50 ms…DC 30 ms)
Cleverly Designed Function Display LED (Green)
1 A voltage other than the supply voltage can be used at B1, but must be within voltages specified on timer.
 Output 2 is selectable as instantaneous contact with sliding switch (⊗) on fr
ont panel (instantaneous when switch is down, timed when switch is up).
‡ Available on multifunction "M," and single function "A" or "B" option timing relays along with code "4" (2PDT contacts). Bridge or potentiometer 10 kΩ, 0.25 W
min. (low voltage) for exter
nal time setting. Set timer dial to 0.0.
Output
LED
Output 1
Output 2
LED
1 C/O (SPST)
2 C/O (DPDT)
‡
Output
LED
‡
Output
LED
t
‡
Output
LED
Output
LED
Output 1
Output 2
LED
1 C/O (SPST)
2 C/O (DPDT)
Output
LED
‡
Output
LED
Output 1
Output 2
Output 1
Output 2
LED
LED
(K) One Shot/Watch Dog (Pulse Controlled)
Output
‡
LED
* A VOLTAGE OTHER THAN THE SUPPLY VOLTAGE CAN BE USED AT
B1, BUT MUST BE WITHIN VOLTAGES SPECIFIED ON TIMER.
Output in Rest Position, No Timing
Output in Rest Position, Time Running
Output in Operation Position, No Time Running
Output in Operation Position, Time Running