Instruction manual

Bulletin 700-HNC
Plug-in Timing Relays
9-75
www.ab.com/catalogs Preferred availability cat. nos. are b
bold
.
Publication A117-CA001A-EN-P
Specifications/ Timing Charts
0
1
2
3
4
5
6
7
8
9
10
11
12
13
Characteristics, Continued
Noise immunity
±1.5 kV, square-wave noise by noise simulator (pulse width: 100 ns/1 μs, 1-ns rise)
Static immunity
Destruction:8 kV
Malfunction:4 kV
Enclosure rating IP40
Weight Approx. 50 g
EMC
Emission Enclosure:EN55011 Group 1 class A
Emission AC Mains:EN55011 Group 1 class A
Immunity ESD:EN61000-4-2:4 kV contact discharge (level 2)
8 kV air discharge (level 3)
Immunity RF-interference:ENV50140:10 V/m (amplitude modulated, 80 MHz to 1 GHz) (level 3)
10 V/m (pulse modulated, 900 MHz)
Immunity Conducted Disturbance:ENV50141:10 V (0.15…80 MHz) (level 3)
Immunity Burst:EN61000-4-4:2 kV power-line (level 3)
2 kV I/O signal-line (level 4)
Standards UL 508, CSA 22.2 No. 14, EN/IEC 61812-1
Certifications
cURus Recognized (File No. E14843, Guide NRNT2/NRNT8), CSA Certified (File 224268), CE Marked, C-
Tick Marked
Timing Charts
Note :t:Set time
Rt:Reset time
Operating Mode Timing Charts / Wiring Diagram
Power (13-14)
Time limit contact
NC (9-1, 10-2, 11-3, 12-4)
Time limit contact
NO (9-5, 10-6, 11-7,12-8)
Run/Power indicator (PW)
Output indicator (UP)
UP PW
Timer
Circuit
One Shot
Power
Output
Power (13-14)
Time limit contact
NC (9-1, 10-2, 11-3, 12-4)
Time limit contact
NO (9-5, 10-6, 11-7,12-8)
Run/Power indicator (PW)
Output indicator (UP)
Repeat Cycle OFF-Start
Power
Output
Power (13-14)
Time limit contact
NC (9-1, 10-2, 11-3, 12-4)
Time limit contact
NO (9-5, 10-6, 11-7,12-8)
Run/Power indicator (PW)
Output indicator (UP)
Power
Output
Repeat Cycle ON-Start
Power (13-14)
Time limit contact
NC (9-1, 10-2, 11-3, 12-4)
Time limit contact
NO (9-5, 10-6, 11-7,12-8)
Run/Power indicator (PW)
Output indicator (UP)