Instruction manual

Bulletin 700-HR
Plug-in Timing Relays
9-88
Accessories
0
1
2
3
4
5
6
7
8
9
10
11
12
13
Description
Pkg.
Quantity Cat. No.
Frame Adapter
For flush or door mounting of all Bulletin 700-HR and -HX timers.
1
700-HN130
Cat. No. 700-HN130
Retainer Clip for Cat. Nos. 700-HN100 and -HN101 Sockets with all 700-HR Timing
Relays
Secures timer in socket.
Note: Not required for installation
10
700-HN131
Sample Retainer Clips
Protective Cover
Helps prevent tampering of timing and mode settings. Provides a degree of protection
against water and dirt from entering the front of the relay. For use with all Bulletin 700-
HRs and -HX timing relays.
1
700-HN132
Cat. No. 700-HN132
Pre-Printed Identification Tags — contains 10 sheets of pre-printed and blank tags.
Each sheet contains 13 sets of the markings CR…9CR, TR…9TR, M…9M, F, R, 1S, and
117 blank tags. Tags are peel-off with sticky backing for easy placement on relays.
10
700-N40
Blank Identification Tags — contains 10 sheets of blank identification tags for
customer specialized printing. Each sheet contains 546 blank tags. Tags are peel-off
with sticky backing for easy placement on relays.
10
700-N41
Bulletin 700-HR Multi-function, Multi-Range Dial Timing Relay, Socket, Retainer Clip Reference Chart
Timer Type
Socket Cat.
No. Retainer Clip Cat. No.
700-HR52, -HRT6, -HRV, -HRQR

700-HN101 700-HN131

700-HN126 Not Required
1

700-HN129 Not Applicable
700-HRS, -HRT4, -HRP, -HRC, -HRM, -HRF, -HRY, -HRQN
‡ 700-HN100 700-HN131(See note above)
‡ 700-HN108 Not Applicable
‡ 700-HN125 Not Required
1
1
Design of these sockets holds the timing relays securely and does not require retainer clips.
 11 pins.
‡ 8 + pins.
www.ab.com/catalogs Preferred availability cat. nos. are b
bold
.
Publication A117-CA001A-EN-P