Instruction manual

Bulletin 700-HX
Plug-in Timing Relays
9-97
www.ab.com/catalogs Preferred availability cat. nos. are b
bold
.
Publication A117-CA001A-EN-P
Accessories
0
1
2
3
4
5
6
7
8
9
10
11
12
13
Description Pkg. Quantity Cat. No.
Screw Terminal Tube Base Socket — Panel or DIN Rail
Mounting; Guarded Terminal Construction. 8-Pin for use with
Bulletin 700-HX Timing Relays. Order ten or multiples of ten
10
700-HN100
Cat. No. 700-HN100
Screw Terminal Tube Base Socket — Panel or DIN Rail
Mounting; Open Style Construction. 8-Pin for use with
Bulletin 700-HX Timing Relays. Order must be for 10 sockets
or multiples of 10. No retainer clip required.
10
700-HN125
Cat. No. 700-HN125
DIN (#3) symmetrical hat rail
35 x 7.5 x 1 m
10
199-DR1
Cat. No. 199-DR1
Specialty Socket
8-pin backwired socket with solder terminals. For use with
700-HX Timing Relays.
10
700-HN108
Cat. No. 700-HN108
Retainer Clip for Cat. Nos. 700-HN100 Sockets with all
700-HX Timing Relays
Secures timer in socket.
Note: Not required for installation
10
700-HN131
Sample Retainer Clips
Frame Adapter
For flush or door mounting of all Bulletin 700-HR and -HX
timers.
1
700-HN130
Cat. No. 700-HN130
Protective Cover
Helps prevent tampering of timing and mode settings. Provides
a degree of protection against water and dirt from entering the
front of the relay. For use with all Bulletin 700-HRs and -HX
timing relays.
1
700-HN132
Cat. No. 700-HN132
Timing Relay, Socket, Retainer Clip Reference Chart
Timer Type Socket Cat. No. Retainer Clip Cat. No.
700-HX
700-HN100 700-HN131
700-HN108
Not Required1
700-HN125
Not Required1
1
Design of socket holds the relay securely and does not require retainer clips.
Accessories