Specifications

3U Traffic Outstation Handbook
667/HB/26568/000 Page 118 Issue 15
9.6.5 MOVA Licence Number (LIC)
11) 9.6.5 Enter the correct MOVA licence number, e.g. ‘LIC=1234 5678’.
From PB681 issue 10 onwards, a valid licence number is required before MOVA can
be put on control.
The licence number is unique to each individual site and is made up of two four-digit
numbers separated by a space. To obtain a licence number for a new site, contact
the Siemens RMS Helpdesk at Poole.
You will be asked to provide the following information before a licence number can
be issued:
1) The Pinnacle reference number or Works Order number.
2) The site reference number, e.g. SCN, STS or EM number.
3) The location of the junction, e.g. the names of the intersecting roads.
4) The customer who purchased the MOVA unit, e.g. the local authority.
5) The filename of the MOVA site data.
6) Is it a new MOVA installation or a replacement of an existing* unit?
(* Even if the existing unit was another manufacturer’s MOVA unit)
7) The telephone number of the site.
Once a licence number has been issued for the unit, it should be written down on the
MOVA Installation sheet for the unit and kept in the controller cabinet. Therefore,
should the licence number need to be re-entered, e.g. after replacement of the
complete unit, then the licence number can just be re-entered from that sheet. An
example MOVA Installation sheet is given on pages 228 and 229.