Specifications

3U Traffic Outstation Handbook
667/HB/26568/000 Page 164 Issue 15
* = Code only used in the fault log (FLG), not the current fault list (FLT)
†
= More details on these codes is provided in the subsections after this table
Code Description <Additional Parameters> - Notes
GGR*
G1G2 Inactive
GPR*
Clear GPS Fault
GPS
GPS Fault <GPS fault>
GP0*
Detector Counts, Group 0
GP1*
Detector Counts, Group 1
HSI*
Handset plugged In
HSO*
Handset Out
INI*
OMCU RAM Initialised
IOA*
IO line Override Active
IPO
Instation Plan Override <plan no>
IPR*
Instation Plan Override Reset <plan no>
LAD*
Local Auto-Dial
LAM
Long Alt. Max <alt max no.> <stage>
LAR
Long All Red
LEX
Long Extension <stage>
LFL
Lamps Flashing - input signal from controller
LIS
Long Inter-Stage from <stage> to <stage>
LME*
Lamp Monitor data Error
LMR*
Lamp Monitor Reset
LMX
Long Max <stage>
LNF*
Lamps Not Flashing - input signal from controller
LOF
Lamps Off
LON*
Lamps On
LPC
Vehicle Classifier Loop Pair Fault
Reset
<upstream input> <downstream input>
LPF
Vehicle Classifier Loop Pair Fault <upstream input> <downstream input>
MCF
†
*
Controller Mode Change From <mode no.>
MCH
†
Controller Mode Change to <mode no.>
MEN
MOVA Enabled (see MOF)
MFC*
Microsense Fault Cleared <Microsense mnemonic>
MFL
Microsense Fault Log entry <Microsense mnemonic>
MOF
MOVA Disabled (‘MOVA Off’) - see section 9.6.10 on page 126
MPH
MOVA Phone Home flag set - see section 9.7.4 on page 132
MSF
MOVA Serial link Failed - see section 9.6.4 on page 117
MSG*
Invalid Message <error code>
MSR
MOVA Serial link Restored - see section 9.6.4 on page 117