Specifications

3U Traffic Outstation Handbook
667/HB/26568/000 Page 189 Issue 15
3. Corrupt Detect message entry
25-APR-99 10:51:10 E:D4 M:.034578768.
E: = Error code (HEX) :
D2 = Invalid LAN Address
D4 = Invalid Message Type
D6 = Invalid Checksum
D8 = Bad Format Message
M: = Message characters as received on the serial port. Non-printing
characters e.g. <STX> are displayed as a ‘.’
NOTE : A GAMBICA vehicle detection received from a SIETAG reader is
recorded as an Invalid Message Type error (D4).
11.9.2 Operations Log Message Rejection Codes
229 = Invalid Loop Number
230 = Invalid Message Count
231 = Invalid Tag Mode in Configuration
232 = Invalid Area Mode in Configuration
233 = Vehicle Number not Found in Output Association List
234 = Invalid Area
235 = Tag Format not Found in Configuration
236 = Area not Found in Configuration
237 = Access Time not Found in Output Association List
238 = Operator Number not Found in Output Association List
239 = Customer Number not Found in Output Association List
240 = Invalid Tag Format
241 = Invalid Vehicle Type
242 = Invalid Vehicle Number
243 = Invalid Operator Number
244 = Invalid Activation ID
245 = Invalid Supplier Code
246 = Invalid Customer Number
247 = Beacon ID/Reader ID not Found in Configuration
248 = Output Activation Request List Full
249 = Beacon ID/Reader ID not Found in Output Association List
250 = Route Number not Found in Output Association List
251 = Invalid Beacon ID/Reader ID
252 = Invalid Radio ID
253 = Invalid Route Number
254 = Invalid Priority Level
255 = Blacklisted in Output Association List