Operation Manual

10
The cooling fan may continue to run when you open the
appliance door.
After each use
Emptying the water tank.
1.Open the appliance door carefully.
Hot steam will escape.
2.Remove and clean the water tank.
3.Thoroughly dry the seal in the tank cover and the tank recess
in the appliance.
Caution!
Do not dry the water tank in the hot cooking compartment. This
will damage the water tank.
Drying the cooking compartment
: Risk of scalding!
The water in the evaporator dish may still be hot. Allow it to cool
before wiping.
1.Leave the appliance door ajar until the appliance has cooled
down.
2.Once it has cooled down, wipe out the cooking compartment
and the evaporator dish with the enclosed cleaning sponge
and dry well with a soft cloth.
3.Remove food residues from the cooking compartment as
soon as the appliance has cooled. Burnt-on remains will be
much harder to remove later.
4.Wipe kitchen units or handles if condensation has formed on
them.
Time-setting options
Your appliance has many different time-setting options. You can
use the
0 button to access the menu and switch between the
individual options.
All the time symbols are lit during the time when you can make
settings. The
N arrow shows you the time-setting option that is
active.
A time-setting option that has already been set can be changed
directly using the
@ or A button when the N arrow is next to the
time symbol.
Checking the time-setting option
Press the
0 button repeatedly until the N arrow is in front of the
particular symbol. The display shows the value for a few
seconds.
Setting the timer
You can use the timer as a kitchen timer. It runs independently
of the cooking operation. The timer has its own signal. In this
way, you can tell whether it is the timer or a cooking time which
has elapsed.
1.Press the 0 button.
The time symbols light up in the display; the
N arrow is in
front of the
V.
2.Use the @ or A button to set the timer.
Default value for the
@ button = 10 minutes
Default value for the
A button = 5 minutes
After a few seconds, the timer duration set is applied. The
timer starts. The
NV symbol for the timer appears, and the
time can be seen counting down.
Changing the timer duration
Use the
@ or A button to change the timer duration. After a few
seconds, the change is applied.
Once the timer duration has elapsed
A signal sounds.
‹:‹‹ appears in the display. Switch the timer
off with the
0 button.
Cancelling the timer duration
Use the
A button to reset the timer duration to ‹:‹‹. After a
few seconds, the change is applied.
Setting the cooking time
If you set the cooking time for your dish, the cooking operation
will end automatically after this time. The appliance stops
heating.
For operating modes involving steam, you must always set a
cooking time.
Example in the picture:
Cooking time of 45 minutes.
Prerequisites:
An operating mode and temperature have been set.
1.Press the 0 button repeatedly until the N arrow is in front of
the
x cooking time.
The time symbols light up.
‹:‹‹ appears in the display.
2.Use the @ or A button to set the cooking time.
Default value for the
@ button = 30 minutes
Default value for the
A button = 10 minutes
3.Press the † button.
The appliance heats up. The cooking time starts counting
down in the display. The
Nx symbol lights up.
In the
é Steam operating mode, the cooking time does not
start counting down until the heating-up time has finished.
Changing the cooking time
Use the
@ or A button to change the cooking time. If the timer
has been set, first press the
0 button.
After a few seconds, the change is applied.
The cooking time has elapsed
A signal sounds. The appliance stops heating. Press the
0
button to stop the signal. To switch off the appliance, turn the
operating mode and temperature selectors back to
Û. Open the
appliance door carefully. Hot steam will escape.
Cancelling the cooking time
Use the
A button to set the cooking time back to ‹:‹‹. If the