Operation Manual

9
Optional accessories
You can obtain further accessories from specialist retailers:
The cooking containers may warp during cooking. This is
caused by the considerable temperature differences acting on
the accessories. It may occur if only a part of the accessory is
covered or if you place frozen items, such as pizza, on the
accessory.
Before using the appliance for the first time
In this section you will find out which steps are required before
using the appliance for the first time:
■ Setting the clock and language
■ Setting the water hardness range
■ Starting the appliance for the first time
■ Cleaning the accessories before use
■ Fitting the grease filter
Setting the clock and language
After making the electrical connection, “Clock” and “Select
language” appear in the display. Set the clock and the
language for the display, if required.
1. Set the current time using the rotary selector.
2. Press the
¿ button to switch to "select language".
3. Set the required language using the rotary selector.
4. Press the 0 button.
The time and language are saved. The current time is
displayed.
Setting the water hardness range
Descale your appliance regularly. This is the only way to
prevent damage.
Your appliance automatically displays when it needs descaling.
It has been preset to water hardness range "medium". Change
the value if your water is softer or harder.
You can check the water hardness with the test strips supplied
or ask your water supplier.
If your water is very hard, we recommend that you use softened
water.
You can only dispense with descaling completely if you
exclusively use softened water. If this is the case, change the
water hardness to "softened".
You can change the water hardness range in the basic settings
when the appliance is switched off.
1. If required, press the
‡ button to switch off the appliance.
2. Press and hold the
± button until "Select language" appears
in the display.
3. Press the
¿ button until “water hardness” appears.
"2-medium" is highlighted in the display.
4. Change the water hardness using the rotary selector.
Possible values:
5. Press the
± button to exit the basic settings.
The change is saved.
Before first use
Before using the appliance for the first time, heat it up while still
empty in the “Steam” type of heating to 100 °C for 20 minutes.
Do not open the appliance door during this time. The appliance
is automatically calibrated (see section: Automatic calibration).
1. Press the
‡ button to switch on the appliance.
The “Hot air” type of heating appears after approx.
4seconds.
2. Fill and insert the water tank (see section: Filling the water
tank).
Before using for the first time, moisten the seal in the tank
cover with a little water.
3. Turn the rotary selector until “Steam” appears.
4. Press the Start button.
The appliance heats up to 100 °C. The cooking time
(20 minutes) does not start to count down until the set
temperature has been reached. Do not open the appliance
door during this time.
The cooking operation automatically ends and a signal
sounds.
5. Press the
‡ button to switch off the appliance.
Leave the appliance door ajar until the appliance has cooled
down.
Accessories Order no.
Cooking container, solid, GN
Z, 40 mm
deep
HZ36D543
Cooking container, perforated, GN
Z,
40 mm deep
HZ36D543G
Cooking container, solid, GN
Z, 28 mm
deep (baking tray)
HZ36D542
Cooking container, solid, GN
Y, 40 mm
deep
HZ36D513
Cooking container, perforated, GN
Y,
40 mm deep
HZ36D513G
Porcelain cooking container, solid, GN
Z
HZ36D533P
Porcelain cooking container, solid, GN Y
HZ36D513P
Wire rack HZ36DR4
Roasting set HZ36DB4
Cleaning sponge 643 254
Descaler 311 138
Honeycomb microfibre cloth 460 770
Core temperature sensor 644 777
Grease filter HZ36DF
Accessories Order no.
7LPHRIGD\


6HWWLQJWKHFORFN
6HOHFWODQJXDJH
(QJOLVK
softened -
1-soft I
2-medium II
3-hard III
4very hard IV