Specifications

Introduction Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
1-2 HiPath 3000 Manager E, Administrator Documentation
intro.fm
About this Documentation
Note that the power management feature on your PC should not be active when transferring
customer databases to and from the communication system.
In this Chapter
There are the following topics in this chapter:
1.1 About this Documentation
This documentation describes the communication systems HiPath 3800, HiPath 3550,
HiPath 3350, HiPath 3500 and HiPath 3300 and the Real-Time Service Manager
HiPath 5000 RSM that are a part of the HiPath 3000 system family.
HiPath 3000/5000 is also called “the communication system” in this document.
Information on the UC Suite for HiPath 3000 (OpenScape Office HX) can be found in the Open-
Scape Office V3 documentation.
>
If you are using Windows NT/2000/XP/2003, note that the access rights of the cur-
rent account may not be sufficient for the installation and operation of HiPath 3000
Manager.
If this is the case, HiPath 3000 Manager must be installed and operated under an
account that has the appropriate system access rights.
If you are not sure about your access rights, contact your system administrator.
Thema
Section 1.1, “About this Documentation”
Section 1.2, “Further Information”
Section 1.3, “Basic Functions”
Section 1.4, “Wizard”
Section 1.5, “File Types”
Section 1.6, “File ass_150e.ini”
Section 1.7, “System Requirements”
Section 1.8, “Communication/Access Types”
Section 1.9, “Installing and Uninstalling the Software”
Section 1.10, “Brief Guidelines for Starting Up”
Section 1.11, “Releasing the USB Interface On HiPath 2000 / HiPath OpenOffice EE for Ad-
ministration”